Abstract:A novel bio-based benzoxazine resin (phenolphthalein-furfuramine-benzoxazine , PTL-F-BOZ) , used bio-based furfurylamine , phenolphthalein , and paraformaldehyde as raw materials , was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR) , nuclear magnetic resonance (H-1 NMR and C-13 NMR) . The curing , thermal and flame retardant properties were analyzed by differential scanning calorimetric (DSC) , thermogravimetric analyzer (TG) , limiting oxygen index (LOI) , vertical burning test, microscale combustion calorimetry (MCC) , cone calorimeter(Cone) and scanning electron microscope (SEM) . The DSC curve of PTL-F-BOZ showed a two-stage curing with two maxima at 224 and 251 degrees C respectively, and had lower curing temperature than that of the traditional fossil-based bisphenol benzoxazine bisphenol A-aniline benzoxazine (bisphenol A-aniline-benzoxazine , BPA-A-BOZ) . The presence of the furan ring in the furfurylamine increased the cross-linking density of polymer, retarded the rearrangement reaction from the phenoxy structure to the phenol structure, and resulted in two curing peaks in the DSC curve of PTL-F-BOZ. Under nitrogen and air atmospheres, the temperatures of 5% mass loss (T-5%) for PPTL-F-BOZ resin were 380 and 370 degrees C , respectively and the residual chars at 800 degrees C were 63. 0% and 10. 5% , respectively. Compared with PBPA-A-BOZ resin, PPTL-F-BOZ resin both possessed higher T-5% and residual char of 800 degrees C. From the DTG curve , the maximum mass loss rates of two decomposition stage (Peak 1 and Peak 2 values) of PPTL-FBOZ resin were 0. 67%/min and 3. 28%/min, which were only 7. 38% and 63. 44% of PBPA-A-BOZ (9. 07%/min and 5. 17%/min) under nitrogen atmosphere , and those were also the same under air atmosphere. LOI of PPTL-F-BOZ resin was 36. 2%, which was higher than that of PBPA-A-BOZ resin. Meanwhile, in the UL-94 test, PPTL-F-BOZ resin extinguished quickly and released less smoke during combustion process, and the original morphology was kept well and a stable carbon layer was formed after burning. Its first ignition time(t(1)) and second ignition time(t(2)) were 1. 4 and 8. 5 s , respectively , far smaller than the maximum permissible values of 10 s, and a UL94 V-0 rating was also achieved. Hence, PPTL-F-BOZ resin showed excellent thermal and flame retardant properties.

Synthesis and Characterization of a New Polytriazole Resin Derived from N , N -Dipropargyl- p -propargyloxyaniline

Synthesis and Properties of a Novel Bio‐based Benzoxazine Resin with Excellent Low‐temperature Curing Ability

Preparation and Properties of a Novel Polytriazole Resin

Synthesis and Properties of a Novel Bio-based Benzoxazine

Novel Thermally Stable and Organosoluble Aromatic Polyamides with Main Chain Phenyl-1,3,5-Triazine Moieties

Fully Aminated Rigid‐rod Aromatic Polyamide Efficiently Reinforces Tetraglycidyl Diamino Diphenyl Methane Epoxy Resin and Its Carbon Fiber Composite

Fully Aminated Rigid-Rod Aramid Reinforced High Strength Epoxy Resin and Its Composite with Carbon Fibers

Synthesis and Characterization of a Novel Heat Resistant Epoxy Resin Based on N,N′-bis(5-hydroxy-1-naphthyl)pyromellitic Diimide

Preparation, Curing Kinetics, and Properties of a Novel Low-Volatile Starlike Aliphatic-Polyamine Curing Agent for Epoxy Resins

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Synthesis, characterization and self-promoted cure behaviors of a new phthalonitrile derivative 4-(4-(3, 5-diaminobenzoyl) phenoxy) phthalonitrile

Effects of Dibenzocrown Ether and Diphenoxyethylene Diether Structural Units on the Properties of Degradable Polyhexahydrotriazine Thermosetting Resins

Recyclable polytriazole resins with high performance based on Diels-Alder dynamic covalent crosslinking

Synthesis and Properties of Poly(p-Phenylene Terephthalamide) Bearing Both Polar and Unsaturated Substituents Introduced Via Claisen Rearrangement Reaction

Synthesis of Pyridine Heterocyclic Low-Melting-Point Phthalonitrile Monomer and the Effects of Different Curing Agents on Resin Properties

Preparation of polyamides containing tetraphenyl-imidazolyl units from 1,2-bis(4-iodophenyl)-4,5-diphenyl-1H-imidazole via C–N coupling reaction and their characterization

Synthesis and properties of a novel high-temperature vinylpyridine-based phthalonitrile polymer

Preparation of Functional Poly(aroyltriazole)s by Metal‐Free Click Polymerization

Method for preparing poly(p-phenylene terephthalamide)

A facile synthetic route to poly(p-phenylene terephthalamide) with dual functional groups.

Synthesis and Characterization of New Aramids Based on O-(M-triphenyl)-terephthaloyl Chloride and M-(M-triphenyl)-isophthaloyl Chloride