Abstract:We design and fabricate a broadband micro polarization beam splitter on SOI (Silicon-On-Insulator) substrate which is compatible with the 180 nm COMS process. The polarization splitter is based on mismatch coupling in which a tapered directional coupler structure with slowly varying waveguide width is used. The device is fabricated in Astar-IME silicon photonics platform. When the waveguide width of the wider port of the tapered waveguide is fixed at 550 nm, by sweeping the taper waveguide length in several waveguide width of the narrower port, the polarization splitter can realize high extinction ratios of the both polarizations in a broad wavelength range. When the waveguide width of the narrow port is 410 nm, the device can split the TE and TM polarizations in a 30 mu m length with the extinction ratios of the both polarizations more than 15 dB over a wavelength range from 1500 nm to 1600 nm. The proposed polarization beam splitter is not sensitive to the fabrication error and has large tolerance. The polarization extinction ratios are still more than 10 dB in a wavelength range of 100 nm even if the waveguide width of the taper has a 50 nm fabrication error. Due to its simple structure and high performance, we believe this micro polarization beam splitter will be widely used in photonic integrated circuit, optical signal processing, and optical communication devices.

Polarization beam splitter with wide bandwidth in air-hole-based periodic dielectric waveguides

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Design and Optimization of Broadband Polarization Beam Splitter Made from A Wave-Structured Multilayer Film

Design of Broadband and Wide-angle Non-polarization Beamsplitter

A broad-angle polarization beam splitter based on a simple dielectric periodic structure.

Broad Bandwidth and Large Fabrication Tolerance Polarization Beam Splitter Based on Multimode Anti-Symmetric Bragg Sidewall Gratings

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Switchable Polarization Beam Splitter Based on GST-on-Silicon Waveguides

Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

Ultra-Broadband Polarization Beam Splitter Based On A Tapered Bent Directional Coupler

Broadband, Fabrication-Tolerant Polarization Beam Splitters Based on a Tapered Directional Coupler

Direct-binary-search-optimized Compact Silicon-Based Polarization Beam Splitter Using a Pixelated Directional Coupler

Periodic dielectric waveguide beam splitter based on co-directional coupling

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Ultra-Broadband And Ultra-Compact Polarization Beam Splitter Based On A Tapered Subwavelength-Grating Waveguide And Slot Waveguide

Broadband Polarization Beam Splitter Based on A Tapered Mismatched Directional Coupler

Broadband Polarization Beam Splitter by Using Cascaded Tapered Bent Directional Couplers

Ultracompact and Broadband Polarization Beam Splitter Based on Polarization-Dependent Critical Guiding Condition

Ultra-broadband Polarization Beam Splitter with Silicon Subwavelength-Grating Waveguides.

Novel ultra-short and ultra-broadband polarization beam splitter based on a bent directional coupler

Double-Structure, Bidirectional And Polarization-Independent Subwavelength Grating Beam Splitter