Abstract:Due to the high integration on vertical stacked layers, power/ground network design becomes one of the critical challenges in 3D IC design. With the leakage-thermal dependency, the increasing on-chip temperature in 3D designs has serious impact on IR drop due to the increased wire resistance and increased leakage current. Power/ground (P/G) TSVs can help to relieve the IR drop violation by vertically connecting the on-chip P/G networks on different layers. However, most previous work only fulfills a margin of the full potential of PG TSVs planning since the P/G grids are restricted in a uniform topology. Besides, the overlook of resistance variation and leakage current will make the results less accurate. In this paper, we present an efficient thermal-aware P/G TSVs planning algorithm based on a sensitivity model with temperature-dependent leakage current considered. The proposed method can overcome the limitation of uniform P/G grid topology and make full use of P/G TSVs planning for the optimization of P/G network by allowing short wires to connect the P/G TSVs to P/G grids in non-uniform topology. Moreover, with resistance variation and increased leakage current caused by high temperature in 3D ICs, more accurate result can be obtained. Both the theoretical analysis and experimental results show the efficiency of our approach. Results show that neglecting thermal impacts on power delivery can underestimate IR drop by about 11%. To relieve the severe IR drop violation, 51.8% more P/G TSVs are needed than the cases without thermal impacts considered. Results also show that our P/G TSV planning based on the sensitivity model can reduce max IR drop by 42.3% and reduce the number of violated nodes by 82.4%.

SoC Floorplanning with IR-drop Consideration

Floorplanning with IR-drop Consideration

A Fast OPC Algorithm for IC Layout Based on 1-D Cells after Optimization of Gap Distribution

Fast Algorithms for Exact IR Drop De-Embedding in Analog Multiply-Accumulate Computing

Floorplanning considering IR drop in multiple supply voltages island designs

Floorplanning with Constraint Extraction Based on Interconnecting Information Analysis

Floorplan and Power/Ground network co-design using guided incremental floorplanning

IR-drop reduction through combinational circuit partitioning

Reallocation and Rescheduling after floor-planning for timing optimization

Interconnect delay optimization via high level re-synthesis after floorplanning

Automated Communication and Floorplan-Aware Hardware/Software Co-Design for SoC

A thermal-driven force-directed floorplanning algorithm for 3D ICs

FIDER: A Force-Balance-Based Interconnect Delay Driven Re-Synthesis Algorithm for Data-Path Optimization After Floorplan

A New Timing-Driven Placement Algorithm Based on Table-Lookup Delay Model

A Criticality-Driven Microarchitectural Three Dimensional (3D) Floorplanner

A Novel Incremental Floorplan Algorithm For Duplication In Integration Of High-Level Synthesis And Floorplan

A new methodology of integrating high level synthesis and floorplan for soc design

Thermal-aware Power Network Design for IR Drop Reduction in 3D ICs.

3D Vertical Rram Architecture and Operation Algorithms with Effective Ir-Drop Suppressing and Anti-Disturbance

Three-Dimensional Integrated Circuits (3d Ic) Floorplan and Power/Ground Network Co-Synthesis

Simultaneous Buffer and Interlayer Via Planning for 3D Floorplanning