Abstract:An experiment was conducted to investigate the surface wave development and the breakup processes of round water jets in cross airflows at room temperature and pressure by highspeed photography. The jets were injected normal to the crossflow direction opposing gravitation forces from a plain orifice nozzle with the diameter of 0.3 mm and length-to-diameter ratio of 40. Successive images were recorded by a megapixel high-speed video camera with maximum frame rate frequency of 10000 Hz. The jet injection velocity varied from 3.8 m/s to 7.8 m/s. The crossflow velocity varied from 25.6 m/s to 35.1 m/s which resulted in the liquid-to-air momentum flux ratio varied from 10.2 to 80.The experimental results indicate that the surface of the liquid jet is smooth at first and then the initial surface wave appears a distance downstream along the jet column. The structure of the liquid jet would be successively deformed to a spiral wave in the cross airflow. When the amplitude grows large enough the liquid column is pinched into segments from the locations of wave troughs due to surface tension. With the increasing of the cross airflow velocity the aerodynamic forces, instead of the surface tension, begin to play an important role in the column breakup process. The liquid column is disintegrated by the cutting of the aerodynamic forces. The smooth length defined as the distance from where initial surface wave appears to the nozzle exit is correlated with the test operation parameters. The smooth length will be increased with the increasing of the jet injection velocity and decreased with the increasing of airflow velocity. The liquid jet column will bend and fluctuate in the crossflow and the normalized fluctuation displacement of the liquid column is correlated with the test operation parameters. The results depict that the increasing of jet injection velocity will diminish the jet column fluctuation whereas the increasing of airflow velocity will enhance it. The liquid column breakup points also fluctuate in the cross airflow. The coordinates of the time-averaged breakup locations are correlated with the liquid-to-air momentum ratio. The equation of the near-field liquid column trajectory curve before the column breakup point is concluded. The curves based on the equation agree well with the tested results.

Similarity Between the Primary and Secondary Air-Assisted Liquid Jet Breakup Mechanisms

Similarity between the primary and secondary air-assisted liquid jet breakup mechanism

Experimental Measurement of Bubble Breakup in a Jet Bubbling Reactor

Breakup of a liquid jet in co-flowing air streams

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

The Primary Breakup and Atomization Characteristics of Liquid Jet in Crossflow at the Fixed Momentum Ratio and Weber Number

An Experimental Investigation on the Secondary Breakup of Carboxymethyl Cellulose Droplets

Secondary breakup mechanisms of a jet-atomized liquid drop

Understanding liquid-jet atomization cascades via vortex dynamics

Modeling Atomization of a Round Water Jet by a High-Speed Annular Air Jet Based on the Self-Similarity of Droplet Breakup

The breakup and instability structures of liquid jets in subsonic crossflows

Breakup Morphology and Mechanisms of Liquid Atomization

Multiscale Simulation of Liquid Jet Breakup in Swirling Crossflows: Breakup Mechanism and Spray Structures

Breakup of liquid jets: Thermodynamic perspectives

Vibration of the Horn Affects the Rayleigh Jet Breakup

Experiment On Breakup Processes And Surface Waves Of Round Liquid Jets In Crossflows

The shattering of abrupt shear thickening suspension jet in an air-blast atomizer

Transition Weber Number Between Surfactant-Laden Drop Bag Breakup and Shear Breakup of Secondary Atomization

Breakup of particle-laden droplets in airflow

Characteristics of breakup of liquid sheet of axisymmetric opposed jets

Influence of atomizer exit area ratio on the breakup morphology of coaxial air and round water jets