Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. This article evaluates the physicochemical and antimicrobial properties when silver-coated silica (SiO2-Ag) nanoparticles as active nanofiller are incorporated into the polypropylene (PP) thermoplastic matrix. The silica (SiO2) nanoparticles were prepared by precipitation method using sodium silicate. After that, silver-coated silica (SiO2-Ag) nanoparticles were synthesized by gamma radiation technique. X-ray diffraction (XRD), Infrared spectroscopy analysis (FTIR) and Transmission electron microscopy (TEM) analysis clarified the formation of SiO2-Ag nanoparticles. SiO2-Ag nanoparticles has a particle size with an average of 70 nm. The melt mixing procedure operated to fabricate PP thermoplastic nanocomposites with various ratios of 1.0, 2.0, and 3.0 part per hundred resin (phr) of the SiO2-Ag nanoparticles. To examine the effect of ionizing radiation on the prepared PP/SiO2-Ag nanocomposites, the samples were exposed to 20 kGy of gamma-irradiation. FTIR, XRD, mechanical analysis, thermogravimetric analysis (TGA), and scanning electron microscope (SEM) were utilized to characterize the physico-chemical alterations of the PP when loaded with SiO2-Ag nanoparticles. It is found that PP/1.0 phr SiO2-Ag nanocomposite revealed superior physico-chemical characteristics than the other two components. The irradiated specimens revealed superior tensile strength (TS) and elastic modulus (EM) over unirradiated ones, whereas inverse effects were predominant in case elongation at break (E%). Tmax of the native PP increased from 335°C to nearly 370°C of PP/1.0 phr SiO2-Ag nanocomposite. It is established that the fabricated PP/SiO2-Ag nanocomposites exhibited potent antimicrobial activity and can be a good candidate for food packaging applications.

Preparation of Antimicrobial Plastics Containing Nano-meter SiO2 Grafted High-molecular Quaternary Ammonium Salt

Preparation of Silicon-Modified Antimicrobial Polyethylene Endotracheal Tubes

Preparation of Antimicrobial of Quaternary Ammonium Salt and Its Application in PP Composite

Preparation and Performance of Ag+-Zn2+-Zeolite Antimicrobial and Antibacterial Plastic

Study of Inorganic Nanometer Antimicrobials Applied to Preparation of Antimicrobial Pledget

Preparation and Antibacterial Activities of Surface-Active Polyquaternary Ammonium Grafted on Polychloromethylstyrene Resin

Characterization of Antimicrobial Poly (lactic Acid)/Nano-Composite Films with Silver and Zinc Oxide Nanoparticles.

Determination of Antibacterial Performance of Nanometer Antibiotic Plastic

Ar-O2 Plasma-Induced Grafting of Quaternary Ammonium on Polyvinyl Chloride Surface to Improve Its Antimicrobial Properties

Preparation of a Silvier Carrying Nano-sized Zeolite Antibacterial Agent and Its Application in Antibacterial Plastic

Physicochemical and antimicrobial characteristics of polypropylene-based nanocomposite containing SiO2-Ag nanoparticles prepared by gamma irradiation

Soft Surface Nanostructure with Semi-Free Polyionic Components for Sustainable Antimicrobial Plastic

Preparation method of mesoporous hollow spherical silver-loaded silicon dioxide antimicrobial

Development Of Antimicrobial Packaging Film Made From Poly(Lactic Acid) Incorporating Titanium Dioxide And Silver Nanoparticles

Preparation and characterization of a permanently antimicrobial polymeric material by covalent bonding

Hydrophilic and antimicrobial properties of acrylic acid and chitosan bigrafted polypropylene melt-blown nonwoven membrane immobilized with silver nanoparticles

Antibacterial Mesoporous Silica Granules Containing a Stable N-Halamine Moiety

Preparation of Effective Antibacterial Composites of Low-Density Polyethylene Modified with Quaternary Ammonium Functionalized Zinc Oxide Nanoparticles

Preparation and characterization of antibacterial poly(lactic acid) nanocomposites with <i>N</i>-halamine modified silica

Highly Permeable Polylactic Acid Membrane Grafted with Quaternary Ammonium Salt for Effective and Durable Water Disinfection

Preparation, Antimicrobial, Crystallization and Mechanical Properties of Nano-Zno-supported Zeolite Filled Polypropylene Random Copolymer Composites