Abstract:Effective and accurate parameter identification, especially the identification of load torque, is one of the key factors to improve the control performance of the robot servo system. Sliding mode observer (SMO) has always been a common method for identifying load torque due to its advantages of simple implementation, strong robustness, and fast response. However, due to the discontinuity of the SMO switching function, the system will generate high-frequency chattering, which will reduce the accuracy of load torque identification and affect system performance. In this paper, an adaptive parameter identification method based on an improved sliding mode observer is proposed. A continuous deformation mode of saturation function based on boundary variation is proposed as the switching function to alleviate the chattering phenomenon. Meanwhile, the relationship between the sliding mode gain and the feedback gain of proposed SMO is defined so that it can be selected properly to improve the accuracy of identification, and the radial basis function neural network (RBFNN) is used to adaptively tune the boundary layer gain according to the speed change. Moreover, considering that the identification result of the load torque is related to the moment of inertia and the mismatch of the inertia will cause identification errors, the variable period integration method is proposed to identify the inertia and redefine the calculation period of the load torque and inertia. The effectiveness and superiority of the proposed method are verified by simulation experiments. Experimental results demonstrate that the improved SMO combines observer gain coefficient tuning and inertia matching can smoothly and accurately estimate the value of load torque, which is an adaptive identification method worthy of reference for robot servo system.

A Friction Identification Method Based on Feedback Signals of Servo Feed System

Differential Model of Friction Based on Bristle Model and Phase-Transition Theory

Parameters identification and analysis of pneumatic cylinders friction model based on experiments

The Friction Model Parameters Identification of Servo System Based on Genetic Algorithm

A New Friction Estimation Approach for Precision Positioner

The Least Square Identification of Static Friction in Servo System

Analysis of the critical Stick–slip velocity of CNC machine tool combining friction parameters identification and dynamic model

A Friction Evaluation Method Based on Barrel Compression Test

An Improved Parameter Identification Algorithm for the Friction Model of Electro-Hydraulic Servo Systems

Stribeck Friction Model Identification Based on Genetic Algorithm

High-precision velocity control of direct-drive systems based on friction compensation

An Identification Method of Equivalent Mechanical Parameters of Ironless Permanent Magnet Synchronous Linear Motor Based on Stribeck Model

Characteristic Modeling and Control of Servo Systems with Backlash and Friction

A VFF-RLS Method of Inertia Identification for PMSM.

Friction dynamics identification based on quadratic approximation of LuGre model

Adaptive Signal-Correction-based Identification for Friction Perception of the Vibration-Driven Limbless Robot

The Modeling of a Two Dimensional Servo System for Precise Positioning Mechanism

Encoder position feedback based indirect integral method for motor parameter identification subject to asymmetric friction

High-accurate Cutting Forces Estimation by Machine Learning with Voice Coil Motor-Driven Fast Tool Servo for Micro/nano Cutting

Two-phase data science framework for compensation of the friction force in CNC machines

RBFNN-Enabled Adaptive Parameters Identification for Robot Servo System Based on Improved Sliding Mode Observer