Abstract:Mechanisms of defect formation near surface ledges of a diamond cubic crystal subjected to compressive strain parallel to the surface are investigated as precursory processes to dislocation nucleation in Si1-xGex/Si(100) heteroepitaxial thin films under surface diffusion conditions. This study is motivated by our preliminary calculations of dislocation formation at surface ledges in a model crystal characterized by the 6–12 Lennard-Jones interatomic potential, and by our controlled annealing experiments on evolution of a Si1-xGex/Si(100) film from an atomically flat, defect-free, surface morphology to an undulating surface morphology with cusp-like surface features and dislocation formation at the cusp valley. When subjecting such films to high temperature anneals, we observed nucleation and growth of three types of dislocations: the 60° glide dislocations, the 90° Lomer-Cottrell dislocations with stair rod Shockley partials and twinned wedge disclinations with twofold ∑9 coincidence boundaries between the wedge and matrix. The objective of this paper is to examine the sequence of atomistic processes which lead to the formation of each of these three types of defects, and in doing so we hope to foster a link between the continuum picture of dislocation nucleation in thin films and the quantum mechanical picture of the unstable collapse of surface ledges due to compressive strain. While we do not actually perform quantum mechanical calculations in this paper, attempts will be made to identify the critical problems that need to be addressed at the quantum mechanics level. Although the present study should be of general interest in the study of dislocation formation near crystal surface ledges, we will confine our discussion to the problem of dislocation formation during stress driven mass transport via surface diffusion in heteroepitaxial thin films which are morphologically unstable under cycloid-like variations in surface shape. The following process is envisioned as undulations form in the film surface. As the curvature at the root of a surface ‘valley’ increases, the local elastic strain magnitude rises as a result of the local geometrical magnification of stress. The strain continues to increase in magnitude as the root sharpens, until atomic ledges collapse to form dislocations. Due to the resulting stress relief, subsequent mass transport reverses its direction of flow and causes such dislocations to be trapped as bulk defects as the film surface moves away from the nucleation sites. Through this mechanism, dislocations can be nucleated without glide by surface trapping in films with even a modest level of nominal compressive mismatch strain.

Level Set Simulation of Dislocation Dynamics in Thin Films

A level set method for dislocation dynamics

Level Set Simulations of Dislocation-Particle Bypass Mechanisms

Elastodynamic Behaviors of Steady Moving Straight Dislocation Within Thin Nano Film

Atomistic models of dislocation formation at crystal surface ledges in Si<sub>1-x</sub>Ge<sub>x</sub>/Si(100) heteroepitaxial thin films

Multiscale Modeling of Deformation in Polycrystalline Thin Metal Films on Substrates

A Dislocation Dynamics Based Higher-Order Crystal Plasticity Model and Applications on Confined Thin-Film Plasticity

Developing Micro-Scale Crystal Plasticity Model Based on Phase Field Theory for Modeling Dislocations in Heteroepitaxial Structures

Study of size effects in thin films by means of a crystal plasticity theory based on DiFT

Kinetic Monte Carlo Simulations of dislocations in heteroepitaxial growth

Epitaxial growth in dislocation-free strained alloy films: Morphological and compositional instabilities

Influence of A Thin Film on A Screw Dislocation in A Substrate with Viscoelastic Interface

Two-dimensional discrete dislocation models of deformation in polycrystalline thin metal films on substrates

Modeling and 2-D discrete simulation of dislocation dynamics for plastic deformation of metal

Simulation of Interface Dislocations Effect on Polarization Distribution of Ferroelectric Thin Films

Investigation of Relationships between Dislocations and Crystal Surface Ledges

Elastic Interaction-Induced Anisotropic Growth of Dislocation Loop Arrays

The numerical simulation of continuum dislocations

Dislocation Dynamics Model to Simulate Motion of Dislocation Loops in Metallic Materials

5542 - MULTI-SCALE MODELING OF DEFORMATION IN POLYCRYSTALLINE THIN METAL FILMS

Molecular Dynamics Simulation of Interaction Between a 60°Dislocation and Vacancy Defects in Si Crystal