Abstract:Active components reloading is critical process for the catalyst regeneration, which is limited by the low adsorption capacity and unwilling distribution of desired components to the catalyst surface. Herein we demonstrated that with dimethyl formamide(DMF) modification and sequentially reloading of vanadium, the traditional V-Ti SCR catalyst, which uses vanadium as the active components and titanium as the carrier, showed the significantly improved DeNOx performance, owing to the increased adsorption capacity and desired distribution of vanadium. When the DMF concentration was 6%, the adsorption capacity of the promoted catalyst was 3.58 and 6.57 mg/g under vanadyl ion concentrations of 1.5 and 3 g/L, respectively, 135 and 147% higher than that of the original catalyst. Adsorption kinetics demonstrated that the pseudo-second-order kinetic model better describes the process by which vanadyl ions adsorb onto the catalyst. In addition, the adsorption equilibrium indicated that Langmuir model was a closer fit for the vanadyl ion adsorption to the promoted catalyst. After DMF modification, the vanadyl ions were first adsorbed onto the functional groups on the catalyst surface, substantially increasing the vanadium loading on the catalyst surface while limiting the increase in vanadium content within the interior of catalyst, which was conducive to enhancing the DeNOx activity and reducing the increase in the SO2/SO3 conversion. When the vanadium adsorption capacity was 3.5 mg/g, the increase in the DeNOx activity of the promoted catalyst was 68.1% higher than that of the original catalyst, whereas the increase in SO2/SO3 conversion was 28.9% lower than that of the original catalyst. Thus, in the regeneration of SCR catalysts vanadium initial concentration and loading could be reduced.

Effects of Sodium and Vanadium on Y Molecular Sieve

Vanadium tolerant FCC catalysts by using rare earth metal oxides: I. Effects of rare earth metal oxides on FCC catalysts

Vanadium tolerant FCC catalysts by using rare earth oxides II . mechanism of vanadium tolerance

Effect of Nickel and Vanadium on Structure and Catalytic Performance of FCC Catalyst

In Situ Synthesis of Nb-modified AFI Topology Molecular Sieve and Its Modulation on the Formantion of High-Efficiency Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Effect of Sodium on the Hydrothermal Stability of Y Zeolite

Properties of MgAlCuFe Complex Oxides for FCC Desulfurization: Effect of Metal Salt Precursors

Effects of rare-earth yttrium on crystallization and magnetic properties of Fe71 .4Si13B9.6Mo2Cr1Cu1P2nanocrystalline alloy

Effect of vanadium and nickel contamination on the property of FCC catalyst

Effect of Dimethyl Formamide (DMF) on Vanadium Reloading over V-Ti SCR Catalyst

A study on the effect of sodium chloride deposition on an FCC catalyst in a cyclic deactivation unit

Study on the Vanadium Poisoning & V-Trap in FCC Catalyst II. Employing Inorganic Minerals & Rare Earth Metals As V-Trap

New Findings in Hydrothermal Deactivation Research on the Vanadia-Selective Catalytic Reduction Catalyst

Effect of vanadium and tungsten loading order on the denitration performance of F-doped V2O5-WO3/TiO2 catalysts

Promotion of SO2 resistance of Ce-La/TiO2 denitrification catalysts by V doping

Effect of chromium content on the phase composition, crystallization and components extraction of vanadium slag

Influence of Sodium on Deactivation and Regeneration of SCR Catalyst During Utilization of Zhundong Coals

A Study on Deactivation of V2O5WO3TiO2 SCR Catalyst by Alkali Metals During Entrained-Flow Combustion

Study of Vanadium as Active Component of Hydrotreating Catalysts Ⅱ The Effect of Vanadium on Residue Hydrotreatment of NiMo/Al2O3 Catalysts

[Effect of Vanadium and Tungsten Loadings on the Surface Characteristics and Catalytic Activities of V2O5-WO3/TiO2 Catalysts].

Differences of La and Ce Location in Y Zeolite Sodalite Cage and Their Effects on Reaction Performance of FCC Catalyst