Abstract:<p>Clinical applications of orthopedic implants require porous structure and hydroxyapatite for osseointegration and osteoinductivity. Nevertheless, contents of hydroxyapatite (HA) and high porosity will degenerate mechanical and corrosion properties of implants. Therefore, a novel function-structure-integrated (Ti–Nb–Zr)/(Ti-HA) composites with high strength, activity and porosity and low elastic modulus consisting of a high dense Ti–13Nb–13Zr core and an external micro- and macro-porous Ti-HA part were designed and fabricated. The central compact Ti–Nb–Zr alloy provides excellent mechanical properties, while the external part with appropriate characteristics of porous structure and bioactive HA, which enhances bioactivity and provides low elastic modulus. The relative density of Ti–Nb–Zr part was 92%, and the porosity of radial Ti-HA part were between 35.3% (5 wt% HA) and 40.1% (20 wt% HA). The compressive strength of composites exhibits a remarkable improvement from 248 to 421 MPa and the elastic modulus from 10.8 to 18.9 GPa. Bioactive HA and specific pores characteristics induced bone-like apatites to deposit on porous part. The homogeneity and thickness of bioactive apatite layer on composites were enhanced with the increase of HA contents. Experimental results of bone mesenchymal stem cells (BMSCs) proliferation, the HA and the pore structure make the (Ti–Nb–Zr)/(Ti-HA) exhibited good cell activity and extensibility to BMSCs. This research would offer a potential strategy for designing and preparing function-structure-integrated orthopedic implants.</p>

Microstructure and Phase Composition of Ti-based Biocomposites with Different Contents of Nano-Hydroxyapatite

Microstructure and Properties of Ti35Nb2.5Sn5HA Biocomposites by Powder Metallurgy and Sintering

Microstructure and in Vitro Bioactivity of 50ti/ha Biocomposite

Porous Ti/HA biocomposites for biomaterial applications

Effects of Sn Content on the Microstructure, Mechanical Properties and Biocompatibility of Ti–Nb–Sn/hydroxyapatite Biocomposites Synthesized by Powder Metallurgy

Microstructure and property evolutions of titanium/nano-hydroxyapatite composites in-situ prepared by selective laser melting.

Fabrication and Characterization of Hydroxyapatite Reinforced with 20 Vol % Ti Particles for Use As Hard Tissue Replacement.

Mechanical and Biological Properties of Hydroxyapatite Reinforced with 40 Vol. % Titanium Particles for Use As Hard Tissue Replacement.

Ti-Nb-Sn-Hydroxyapatite Composites Synthesized by Mechanical Alloying and High Frequency Induction Heated Sintering

Hydroxyapatite Reinforced With Ti-Fe Particle: Correlation Between Composition, Microstructure And Mechanical Properties

Correlations Between the in Vitro and in Vivo Bioactivity of the Ti/HA Composites Fabricated by a Powder Metallurgy Method.

Mechanical and Corrosion Properties of Ti-35Nb-7Zr- X HA Composites Fabricated by Spark Plasma Sintering

Tribological behavior study on Ti-Nb-Sn/hydroxyapatite composites in simulated body fluid solution.

In vivo bioactivity of Ti/HA biocomposites fabricated by powder metallurgy methods

Effects of Hydroxyapatite Additive Content on the Bioactivity and Biomechanical Compatibility of Bioactive Nano-Titania Ceramics

Microstructure And Characteristics Of Ti-Nb-Sn-Ha Composite Powder Fabricated By Mechanical Alloying

Effect of Milling Time on Microstructure of Ti35Nb2.5Sn/10HA Biocomposite Fabricated by Powder Metallurgy and Sintering

Fabrication and Characterization of Titanium-Matrix Composite with 20 Vol% Hydroxyapatite for Use As Heavy Load-Bearing Hard Tissue Replacement

Function-structure-integrated Ti-HA coatings on TiNbZr with enhanced mechanical properties and bioactivity prepared by spark plasma sintering

Characterization on Ti35Nb7Zr Based Hydroxyapatite Composites Prepared Via Rapid Sintering for Biomedical Applications

Effect of HA Content on Microstructure and Compression Properties of Ti-Nb-Sn/HA Composites Fabricated by Plasma Current Activated Sintering