Abstract:Degradative cracking, more commonly known as "environmental stress cracking" (ESC) has been observed in many implanted polyetherurethane elastomers. This phenomenon has been attributed to biochemical and cellular interactions at the surface of the implanted material causing polymer chain cleavage. This may result in surface fissuring followed by the deep cracking associated with considerable biodegradation of the polymer, resulting in loss of mechanical strength and the formation of aneurysms in an in vivo situation. These cracking effects are believed to be due to mechanical stress combined with the oxidising actions of macrophages and giant cells, as surface cracking has been observed to occur directly under adherent macrophages on a polyetherurethane implant. These cells form part of the body's immune response which uses enzymes and reactive oxygen species (02, 02, HO* and H 2 O 2 ) to degrade foreign material. We describe a modification of an in vitro test method developed by Zaho et al. [1] using glass wool and a Hydrogen Peroxide/Cobalt (II) Chloride (H 2 O 2 /CoCl 2 ) mixture to replicate the oxidising effects of macrophages in vivo. The modifications were made to establish a routine testing system for resistance to biodegradation which could be used to screen a range of polymers designed for use in microporous vascular grafts. The grafts are pre-stressed by a method devised by Stokes et al. [2] where each graft is stretched to a predetermined elongation over a mandrel and the strain is fixed by tying PTFE tape around each end of the mandrel. Initial comparative testing used two materials fabricated into vascular grafts with identical dimensions and an interior diameter of 5 mm. The first, a polyetherurethane-Estane 5714 F1 (BF Goodrich Specialty Plastics UK Ltd.), showed the in vitro test method to have an acceleration factor of approximately nine times over in vivo trials resulting in catastrophic failure during the sixth week. The second material, a new generation polycarbonate-based polyurethane, Chrono Flex (Cardio Tech International Ltd.), displayed outstanding resistance against environmental stress cracking, maintaining its structure throughout the entire test period of thirty-five weeks. These results will be followed up with long-term in vivo implantation studies to corroborate these findings.

PS220. Thermo-Mechanical Resistance of a Nanocomposite Polymer Exposed to Simulated in Vivo Hydrodynamic Fatigue for Ten Years in Development of a Sutureless Endovascular Stent Graft

Experimental Analysis of In Situ Fenestration of Endovascular Stent-Grafts: Comparison between Needle and Laser Puncture

Manufacture of small calibre quadruple lamina vascular bypass grafts using a novel automated extrusion-phase-inversion method and nanocomposite polymer

[Dynamic studies on adrenalin-like substances and on biological activity of the blood in certain forms of diencephalic pathology].

Cytocompatibility Evaluation of a Novel Series of PEG-Functionalized Lactide-Caprolactone Copolymer Biomaterials for Cardiovascular Applications

Endovascular Nitinol Stenting for Long Occlusive Disease of the Superficial Femoral Artery in Critical Limb Ischemia: A Single-Center, Mid-Term Result

Resistance to Biodegradative Stress Cracking in Microporous Vascular Access Grafts

Mechanical Performance Assessment of Physician Modified Aortic Stent Graft

In vivo biocompatibility of a new hydrophobic coated Al/Al2O3 nanowire surface on stents

[Penal liability from retained foreign body inside the surgical site].

New stent surface materials: the impact of polymer-dependent interactions of human endothelial cells, smooth muscle cells, and platelets

Computational and Experimental Investigation into Mechanical Performances of Poly-L-Lactide Acid (PLLA) Coronary Stents

In Vivo Degradation of Copolymers Prepared from L-Lactide, 1,3-Trimethylene Carbonate and Glycolide As Coronary Stent Materials

Failure signal of high orientation Poly(L-lactic acid) monofilament for self-expanding stent during lifetime: Disappeared amorphous connections

The ciliated human keratinocyte.

Hybrid interpenetrating network of polyester coronary stent with tunable biodegradation and mechanical properties

A Comparative Study of an Anti-Thrombotic Small-Diameter Vascular Graft with Commercially Available e-PTFE Graft in a Porcine Carotid Model

Preparation and characterization of a polyvinyl alcohol/polyacrylamide hydrogel vascular graft reinforced with a braided fiber stent

Mechanical and Biocompatibility Performance of Bicomponent Polyester/Silk Fibroin Small-Diameter Arterial Prostheses

Enamel prism orientation and enamel-cementum relationship in the cervical region of premolar teeth.

A novel angiography-based computational modelling for assessing the dynamic stress and quantitative fatigue fracture risk of the coronary stents immediately after implantation: Effects of stent materials, designs and target vessel motions