Abstract:In this work, Zn-Mg-Al-LDHs was prepared by co-precipitation. LDHs-B-OM was prepared with Zn-Mg-Al-LDHs by coupling method and thiol-ene click chemical reaction. The optimum conditions of thiol-ene click reaction were determined by orthogonal experiment as follows: reaction time of 5 h, mass ratio of OM to B-LDHs of 1: 1, mass ratio of LDHs-B to initiator of 100: 9. LDHs-B-OM was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy, scanning electronic microscope, and static contact angle, which showed that its surface modification was confirmed successfully. Then, PLA/LDHs-B-OM films were prepared by blow molding process using LDHs-B-OM as fillers and PLA as matrix. The mechanical properties, rheological properties, and crystallization behavior of PLA/LDHs-B-OM films were studied, which showed that the elongation at break, the tensile strength of PLA0 and PLA4 (0.7 wt% LDHs-B-OM) were 14.20%, 36.47 MPa, 74.09%, and 46.99 MPa, respectively, which demonstrated that LDHs-B-OM had a significant strengthening and toughening effect on PLA. Rheological behavior results showed that LDHs-B-OM effectively promoted the movement of PLA molecular chain. The shearinduced crystallization behavior and thermal degradation was analyzed by simultaneous rheology and FTIR technology, which showed that the carbonyl peak shifted from amorphous region to crystalline phase region. The reason was that LDHs-B-OM acted as a nucleating agent to accelerate the crystallization process of PLA. The carbonyl index reduction of PLA0 and PLA4 before and after thermal degradation was 14.93% and 7.97%, respectively, which provided sufficient evidence that the addition of LDHs-B-OM improved thermal stability of PLA. Graphical

Study on Synthesis of Biodegradable Material Poly(lactic Acid-co-Alaine) Via Melt Polycondensation

Melt Polycondensation of L‐lactic Acid Catalyzed by 1,3‐dialkylimidazolium Ionic Liquids

Lactonization and condensation polymerization of 5-hydroxylevulinic acid

Synthesis of Poly(l-Lactic Acid) with Improved Thermal Stability by Sulfonic Acid-Catalyzed Melt/solid Polycondensation

Direct Synthesis of Biodegradable Material Polylactic Acid-Polyethylene Glycol via Melt Copolymerization and Catalyzed by Stannous Oxide

Ring-opening Polymerization of L-Lactide Catalyzed by a Novel Molybdenum-Based Catalytic System

Synthesis of High Molecular Weight Poly(L-Lactic Acid) and Poly(D-Lactic Acid) with Improved Thermal Stability Via Melt/Solid Polycondensation Catalyzed by Biogenic Creatinine

Improvement on Direct Polycondensation of Polylactic Acid

Environmental-Friendly Catalyzed Synthesis Of Poly(Lactic Acid-Co-Citric Acid) By Macro Resin Solid Acid Using Direct Melt Polycondensation

Polymerization of Lactides and Lactones, 12. Synthesis of Poly[(glycolic Acid)-Alt-(l-glutamic Acid)] and Poly{(lactic Acid)-Co-[(glycolic Acid)-Alt-(l-glutamic Acid)]}

Influence of Cocatalyst on High Temperature Polymerization of Propylene Catalyzed by Ziegler-Natta Catalyst

Synthesis and Modeling of Poly(L-lactic acid) via Polycondensation of L-Lactic Acid

Synthesis of Poly(D,L-Lactic Acid-Alt-Glycolic Acid) from D,L-3-Methylglycolide

Synthesis of Poly(Lactic Acid-co-Glycolic Acid) Copolymers with High Glycolide Ratio by Ring-Opening Polymerisation

Synthesis and degradation of polyesteramide based on L-lactic acid and beta-alanine

Synthesis and Degradation of Polyesteramide Based on L-Lactic acid and β-Alanine

The effect of chemical composition on the degradation kinetics of high molecular weight poly(trimethylene carbonate-co-L-lactide)

Preparation of modified hydrotalcite based on click chemistry and its effect on the shear induced crystallization, rheological behavior and thermal degradability of poly (lactic acid) film

Study on Biodegradable Polymer Materials Based on Poly(lactic Acid). I. Chain Extending of Low Molecular Weight Poly(lactic Acid) with Methylenediphenyl Diisocyanate

Biodegradable Aliphatic/aromatic Copolyesters Based on Terephthalic Acid and Poly(l-Lactic Acid): Synthesis, Characterization and Hydrolytic Degradation

Synthesis and compositional analysis of poly(lactic acid-co-3-phenylmethyl- 2, 5-morpholinedione)