Abstract:Objective: This study aims to analyse the influence of different lining material, thickness and coverage on residual stress of class II molar restoration by the multilayer technique through the three-dimensional (3D) finite element (FE) method. The objective is to reveal the correlations between the base layer configurations and the residual stress distributions of the tooth. Methods: A 3D reconstructed model of an extracted first molar was built through micro-CT images and a class II mesio-occlusal-distal cavity was prepared using computer-aided engineering (CAE) software. A bilayer technique was then applied, and 3D FE analyses were performed under polymerization contraction loading. Glass ionomer composites (Vitrebond and Ionosit) and flowable composite resin (Luxa Flow and Z350 Flowable Restorative) were used as lining materials. Moreover, several sensitivity analyses with dozens of hypothetical lining materials were conducted to provide definitive results. The thickness of the base layers was set to be distinct (0.5 mm or 1 mm) so as to reveal its effect on the stress alleviation. Various lining strategies with the liner covering different areas of the cavity walls (Closed Sandwich, Open Sandwich and Special Open Sandwich) were adopted to determine the effects of the base layers. Results: Adoption of an appropriate liner could effectively reduce the polymerization shrinkage stress. The mechanical properties of the base layer can affect the residual stresses, basically a lower Young's modulus and lower Poisson's ratio (of lining material) result in better stress mitigation, therefore reducing the stress transmitted to the dentin. Increase of the lining thickness within a certain range could lead to a decrease in the probability of stress concentration formation. Lining strategies had the strongest influence on the stress distributions. Different lining coverage could cause various stress responses, and covering all cavity walls with the lining material had the optimal performance among all the simulations in this study. Significance: The multilayer technique is an effective way to prolong the service life of resin composites restorations. A thorough evaluation of the sandwich technique through the FE method can provide a better understanding of the stress distributions of the restoration, and reveal its internal mechanisms.

The optimization design of the bioinspired functionally graded interface layer of the three dimensional cambered all-ceramic restoration

Digital light printing of zirconia/resin composite material with biomimetic graded design for dental application

A parametrical finite element analysis for functionally graded material overlay restoration

The effect of dental restoration geometry and material properties on biomechanical behaviour of a treated molar tooth: A 3D finite element analysis

Functionally graded bi-material interface for Porcelain Veneered Zirconia dental crowns: A study using viscoelastic finite element analysis

Biomechanical behavior of functionally graded S53P4 bioglass-zirconia dental implants: Experimental and finite element analyses

Micromechanical modelling for bending behaviour of novel bioinspired alumina-based dental composites

[Three-Dimensional Finite Element Analysis of One-Piece Computer Aided Design and Computer Aided Manufacture Involved Zirconia Post and Core].

Effects of the lining material, thickness and coverage on residual stress of class II molar restorations by multilayer technique

Investigation of the structure and mechanical properties of a novel dental graded glass/zirconia ceramic

[Three-Dimensional Finite Element Analysis on Half of the Structure Defect with Post Core and All-Ceramic Crown Restoration of Mandibular First Molar].

Additive manufacturing of Bio-inspired ceramic bone Scaffolds: Structural Design, mechanical properties and biocompatibility

Strong and tough bioinspired nacre-like B4C/Al functionally graded materials with eliminated abrupt interfaces

Finite element based optimization design for a one-piece zirconia ceramic dental implant under dynamic loading and fatigue life validation

Rational Design of Bioceramic Scaffolds with Tuning Pore Geometry by Stereolithography: Microstructure Evaluation and Mechanical Evolution

The three-dimension finite element analysis on mandibular first molar restored with different designed fiber post-core and all ceramic crown

Methodological approaches in graded dental ceramics

A two-stage shape optimization process for cavity preparation.

Effects of the Mechanical Properties of Veneering Porcelain on Stress Distribution of Dental Zirconia Layered Structure: A Finite Element Model Study

Ceramic Inlay Bonded Interfaces in Minimally Invasive Preparations: Damage and Contributing Mechanisms in Sliding Contact

Fabrication and Characterization of Dental Restorative Composites with Gradient Properties