Design and Implementation of EPG Based on the UTI Protocol

Xin ZHOU,Xing-Jun WANG

DOI: https://doi.org/10.3969/j.issn.1002-8692.2007.z1.019

2007-01-01

Abstract:This paper firstly introduces UTI protocol designed by Tsinghua University,and then presents the analysis and design of the interactive objects of XDC and KBD resources.Finally,the implementation of the EPG based on UTI protocol is described.

What problem does this paper attempt to address?

Design and Implementation of EPG in STB

LU Dong-li,XING Wei,LU Dong-ming

DOI: https://doi.org/10.3969/j.issn.1002-8692.2006.05.013

2006-01-01

Abstract:The paper analyzes the trend of internal EPG and emphasizes the importance of the general EPG system on design, expatiates those program specification information and service information that are needed for establishing EPG system, studies the actualization project, and presents how to realize the EPG system and the key technology combining with practice.
Design and realization of information intercourse system for news center

Chao ZHENG,Jun HUANG,Min YAO

DOI: https://doi.org/10.3969/j.issn.1000-7024.2005.03.012

2005-01-01

Abstract:This information intercourse system (IICS) is designed for the news intercourse among TV stations and modernization of network and information management in the TV station. Firewall and double-server structure are used in hardware; in software, tech- nologies such as WEB, MIS and database synchronization are adopted. The whole system is completed with the help of the guideline of software engineering. A design for the system is introduced in detail, stating some key technologies using in system realization, and also having a study on some main problems in system realization.
Design and Implementation of a Video on Demand System

Kuang Wang

2006-01-01

Abstract:This paper introduces a Video on Demand system based on both CATV broadcasting channels and IP interactive network. CATV broadcasting channels are used for content transmission and IP network is used for control information transmission between Set Top Box and Headend Server. The control mechanism of whole system is designed and implemented according to DSM-CC protocol stacks. The paper narrates the end-to-end system diagram and VoD application software of Set Top Box. The system can be used in CATV network and provide VoD services for CATV subscribers.
A Transmission Scheme of the Advanced Digital Television Broadcasting System

张文军,夏劲松,王匡,葛建华

DOI: https://doi.org/10.3969/j.issn.1002-8692.2002.01.003

2002-01-01

Abstract:With the co-efforts from Zhejiang University,Shanghai Jiao Tong University and Xidian Universi-ty,a transmission scheme of the Advanced Digital Television Broadcasting System(ADTB)is presented in this paper.The simulated system functions and performance are superior to that of international DTV transmission standards.A stable fixed,portable and even mobile reception of large volume broadcasting data can be attained with a consumer grade tuner and various modulation modes.The scheme is also designed to support SFN and on-channel repeater functions,to incorporate efficient digital cable transmission modes,and to be easily compatible with some foreign standards.The presented scheme is one of the ideal candidates of DTV broadcasting standards being defined in our country.[
Design and implementation of an Optimized EPG system in Set-Top-Box

ZHANG YUE,DONG FENG,LENG XIANGLUN,ZHOU ZUCHENG

DOI: https://doi.org/10.3969/j.issn.1008-0570.2006.35.023

2006-01-01

Abstract:This paper introduces an optimized scheme for Electronic Program Guide system in Set-Top-Box. The scheme has different SI engine for simple EPG and advanced EPG in order to improve the efficiency; it also provides a new structure for EPG database which include event index database and event information database, and this structure is convenient to visiting and management.
Design and implementation of a J2EE-Based platform for network teaching

Qinming He,Ling Qiu,Zhen He

DOI: https://doi.org/10.1007/11528043_5

2005-01-01

Abstract:Nowadays e-learning is playing an important role in remote education, group training and tertiary education. In this paper, we first address the importance and functionality of e-learning in modern education; we then present an e-learning tool—network teaching platform ETP, which is implemented by techniques of J2EE, analyze the system functionality, and give the details of system design. Our practice shows that the platform is functionally stable for practical usage.
Design and Realization of Application Interface Between Real-Time Database and Industrial Process Control System

GAO Feng,WAN Li,LIU Yu-ming,WU Jun-qiang,WANG Xiao-yong,LIANG Jun,WANG Wen-qing,LIU Zhi-peng

DOI: https://doi.org/10.3969/j.issn.1671-7147.2007.01.002

2007-01-01

Abstract:For the application of real-time database in a petrochemical plant,the article put forwards to a new concept to resolve the communication among real-time database and DCS,control software,and Web-based user interface.The scheme is developed based on Windows 2000 Server using the technique of multe-threading,anolymous pipe and WinSock,etc.The results of long industrial running of this scheme show that it is more effective and feasible for industrial process.
Design and Practice of the Clinical Information System for ICU

Hao-Min Li,Jing-Yi Feng,Xu-Dong Lu,Hui-Long Duan

DOI: https://doi.org/10.3969/j.issn.1671-7104.2007.05.009

2007-01-01

Abstract:This paper presents a typical Clinical Information System for ICU and its design and implementation. This system is able to capture and archive vital data from the monitor network, providing a whole digital solution in ICU. These vital data can be used in quantitative analysis in the computer-assisted decision support.
Usability evaluation of digital-TV program guide interface

Yang Liu,Qigang Zhao,Xiaoyi Wang

2009-01-01

Journal of Computational Information Systems

Abstract:The electronic program guide (EPG) is a platform for interaction between the users and Digital-TV. Its usability will influence the TV use behavior. This paper adopts Microsoft usability guideline (MUG) and fuzzy assessment, analyses the usability of the EPG based on users' assessment, then gives out some improving strategies. © 2009 Binary Information Press August, 2009.
Design of Communication Protocols of Remote Monitoring System Based on Multi-Tiered Structure

HU Li-xia,ZHAO Guang-zhou

DOI: https://doi.org/10.3969/j.issn.1001-4551.2007.01.010

2007-01-01

Abstract:A new kind of communication protocols based on multitiered structure,which was applied in a remote environment monitoring system,was brought out.In the new thought,communication protocols have been divided into 3 layers: application data layer,network communication layer and network interface layer,and the design methods of every layer were given out.Communication protocols based on multi-tiered structure is independent,agile,easy to realize and maintain,and propitious to standardize.
Universal transport interface for digital television receiving devices

Jun Li,Yonglin Xue

DOI: https://doi.org/10.1109/ICEEE.2010.5661326

2010-01-01

Abstract:in this paper, we give an introduction to Chinese standard Universal Transport Interface (UTI) for digital television receiving devices. UTI standard, with independent intellectual property rights, is based on the high speed USB2.0 physical interface. It has two logical interfaces: TS interface and command interface. It aims not only to support the conditional access (CA) service, but also to support lots of value-added applications, such as Electronic Program Guide (EPG), Video on Demand (VoD), etc. ©2010 IEEE.
The design and implementation of RTOS on CM-STB

Wen-zhi CHEN,Lie SHI

DOI: https://doi.org/10.3969/j.issn.1000-7024.2000.04.007

2000-01-01

Abstract:STB(Set Top Box)now becomes one of the most important user-interface devices.Its functions have updated from a simple multi-frequency tuner into an interactive information service platform.General network information service such as Internet WWW, Video on Demand, Email and Stock Exchanging Service are well provided to fulfill the need of real application. The design of STB involves hardware and software. This paper concerns the software, and discusses the RTOS (Real time Operation System),implemented by us, on CM-STB (Cable Medem Set-Top Box) in detail.
Tsinghua University Information Programming Design and Implementation

WANG Yingxue,SHEN Peihua,YU Panxiang

DOI: https://doi.org/10.3321/j.issn:1000-0054.2000.03.032

2000-01-01

Abstract:Campus networks in the national universities continue to develop with three type of information systems. After the construction of the Tsinghua University campus network, a university wide, open, distributed, multimedia information system was built. This paper introduces several techniques applied at the Tsinghua University Information System, to resolves all users' queres with the world wide web(WWW) technique, to provide an official working environment with the Lotus Notes technique, and to develop an administrative management information system with DB technique. The system structure combines three structures, the browser/web server, the browser/web server/DBMS and the client/server. Several important application systems developed with these techniques are running successfully on the campus network.
Design and Evaluation of Universal On-board Train Interface Unit

Ping Tan,Yiming Shi,Xiaochun Zhang,Xueming Jiang,Zhihua Chen

DOI: https://doi.org/10.1109/icicee.2012.370

2012-01-01

Abstract:Train Interface Unit (TIU) is the key execution unit of on board Automatic Train Protection (ATP) system. ATP system achieves the control of the train and information exchange with the train via TIU. Developing a TIU which fits for different train platform and is in compliance with the safety integrity level (SIL) 4 can greatly facilitate the system installation and lower operation and maintenance cost. This thesis has designed a TIU for a series of standard train platform. Based on the system design, four key technologies of TIU, include relay and Multifunction Vehicle Bus (MVB) interface, safety communication, emergency brake (EB) interface and service brake (SB) interface, are in-depth in anatomist. Through the thorough analysis and evaluation of the safety and real-time performance, we can get the conclusion that the TIU sub-system meets the requirements of the practical use.
Design and development of an ecg monitoring system based on wireless system-on-chip technology

LIU Zili,XU Jian,CHEN Jinshui,LU Jiangang,SUN Youxian

DOI: https://doi.org/10.3969/j.issn.2095-2783.2009.01.012

2009-01-01

Abstract:For the purpose of better preventing cardiovascular diseases and improving the life quality of human beings,a scheme of an electrocardiogram(ECG)monitoring system based on wireless system-on-chip technology is presented in this paper.Firstly,the hardware design of the ECG signal sampler and the base station is shown in detail,including the design of the amplification circuit and the choice of the MCU-wireless system-on-chip package.Secondly,the wireless communication protocol between the ECG signal sampler and the base station is determined,based upon which the software for the ECG signal sampler is developed.Thirdly,the initialization and communication protocols between the base station and the remote monitoring center are determined,based upon which applications programs are developed.Lastly,the remote monitoring center is described.With the integration of wireless system-on-chip technique,wireless communication technique,embedded system technique and internet technique,the system finally fulfill the goal of remote ECG monitoring.
An UTI-based Set-Card Separation System

ZHANG Hai-gang,WANG Xing-jun

DOI: https://doi.org/10.3969/j.issn.1002-8692.2006.11.008

2006-01-01

Abstract:This paper introduces three Set-Card Separation solutions in China. And by analyzing the UTI standard of Tsinghua University, this paper concludes some problems in designing the Set-Card Separation system and gives the ways to resolve them. Finally, the development tendency of Set-Card Separation system is forecasted.
An interface designed for networked monitoring and control in wireless sensor networks

Xianghui Cao,Jiming Chen,Youxian Sun

DOI: https://doi.org/10.1016/j.csi.2008.03.026

IF: 3.721

2009-01-01

Computer Standards & Interfaces

Abstract:In this paper, a new interface is developed in detail that provides terminal users with ways for direct and convenient interactions with the wireless sensor networks (WSNs). It also embraces an Internet based subsystem for remote monitoring and controlling of the WSNs. Different from existing platforms and interfaces, our design is general, extensible and not constrained for specific applications. More importantly, it paves the way for improving the data processing efficiency and avoiding data execution congestion. It proposes the idea utilizing the advantages of existing professional mathematical software tools, such as Matlab, Mathematica and Maple, to process the WSN data.
IP Gateway of Interactive Digital TV System

柳攀,薛永林,李凤亭

DOI: https://doi.org/10.3969/j.issn.1002-8692.2002.04.003

2002-01-01

Abstract:This paper introduces the scheme of IP gateway of Interactive Digital TV system,which is based on TCP/IP Protocols.It analyses the design from the hardware,driver,protocol translation,NAT respective ly.It also puts forward the structure of user-defined MPEG-2private data.
Design and Implementation of Channelized Data Acquisition Card for Iub Interface in 3G Network.

Xiaojiao Wang,Zhizhong Zhang,Yun He

DOI: https://doi.org/10.1109/fskd.2012.6233760

2012-01-01

Abstract:In order to achieve real-time monitoring, evaluation and analysis of the Iub interface in 3G network with better use of the existing 3G network resource, it studied and designed a scheme of channelized data acquisition card for Iub interface. Compared to the existing data acquisition cards for Iub interface, the proposed scheme designed a modular channelized data acquisition card, which not only gave a method on STM-1/E1's multiplexing and de-multiplexing based on the space-division and time-division switching, but also proposed the algorithm of getting IMA group binding information automatically. Practical testing and application results have demonstrated that the designed data acquisition card is of high flexibility and compatibility.
The Design and Implementation of Digital Campus System Based on Geo-Union

罗英伟,刘昕鹏,王月龙,汪小林,许卓群

DOI: https://doi.org/10.3969/j.issn.1006-8961.2002.08.019

2002-01-01

Journal of Image and Graphics

Abstract:Firstly, the development and application of digital city are introduced. Aiming at the complexity of constructing digital city, the key issues and implementation scenario of constructing digital campus based on GIS component are explored, which will give a practical method and useful reference for digital city. Adopting the GIS platform Geo-Union, a digital campus of Peking university (PKU campus) is built. The architecture of PKU campus is based on Browser/Server mode, which consists of four layers: Browser, Web Server, Geo-Union Server and Spatial database server. The spatial information of PKU campus is organized as spatial entity, map layer and map and stored in Oracle8i.According the distribution of the campus, the spatial information consists of five parts: environment, main campus, Yan-bei campus, Chang-ping campus and medicine campus. The functions of PKU campus include information services both inside PKU and around PKU, such as map exploring, Web linking, site locating, spatial querying and navigating. The implementation method of PKU campus is based on WebGIS component and ASP. Two secondary developing components (GisView and PicView) are designed to integrate visualization, map operation, human-user interaction for map and image.PKU campus integrates all-sided service information in PKU, which will provide a convenient information channel for all members of PKU and other users, and will be a new window for exhibiting the image of PKU.

Design and Implementation of EPG Based on the UTI Protocol

Design and Implementation of EPG in STB

Design and realization of information intercourse system for news center

Design and Implementation of a Video on Demand System

A Transmission Scheme of the Advanced Digital Television Broadcasting System

Design and implementation of an Optimized EPG system in Set-Top-Box

Design and implementation of a J2EE-Based platform for network teaching

Design and Realization of Application Interface Between Real-Time Database and Industrial Process Control System

Design and Practice of the Clinical Information System for ICU

Usability evaluation of digital-TV program guide interface

Design of Communication Protocols of Remote Monitoring System Based on Multi-Tiered Structure

Universal transport interface for digital television receiving devices

The design and implementation of RTOS on CM-STB

Tsinghua University Information Programming Design and Implementation

Design and Evaluation of Universal On-board Train Interface Unit

Design and development of an ecg monitoring system based on wireless system-on-chip technology

An UTI-based Set-Card Separation System

An interface designed for networked monitoring and control in wireless sensor networks

IP Gateway of Interactive Digital TV System

Design and Implementation of Channelized Data Acquisition Card for Iub Interface in 3G Network.

The Design and Implementation of Digital Campus System Based on Geo-Union