Abstract:Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings. The properties of the nitrided zone produced by plasma nitriding are influenced by the applied process parameter, in particular temperature and time. However, for high-alloy tool steels, a deeper understanding of the underlying diffusion processes of the nitrogen and the interaction with the existing microstructure, as well as the effects on the case depth is still lacking. Therefore, in this study, specimens of high-alloy tool steel X153CrMoV12 were plasma nitrided at varying temperatures (480 °C, 520 °C, 560 °C) and treatment times (2 h, 4 h, 16 h). The resulting nitrided zones were investigated by optical and scanning electron microscopy (OM and SEM), depth-dependent glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), and hardness measurements to characterize their microstructure, chemical composition, and hardness depending on the process parameters. The distribution of carbides (M7C3), e.g., chromium carbides, affects the diffusion of the nitrogen and the layer growth. An increase of temperature and duration leads to an increased layer thickness. The composition of the compound layer is, e.g., influenced by the process parameters: ε nitrides (Fe2–3N) occurred preferentially at lower temperatures, while γ′ nitrides (Fe4N) appeared mostly at higher temperatures. In order to investigate the influence of the carbides of the high-alloy tool steel on the nitriding process, a new methodology was developed by means of finite element analysis (FE), which makes it possible to analyze this influence on the development of the nitrogen concentration profile. This methodology makes it possible for the first time to map the heterogeneous nitrogen evolution and distribution.

Thermal Stability of Iron Nitrides Prepared by Mixing Laser and Plasma Beam Nitriding Technology

Thermal Stability of Carbon Nitride Thin Films Prepared by Electron Cyclotron Resonance Plasma Assisted Pulsed Laser Deposition

Thermal Stability of Tungsten Sub-Nitride Thin Film Prepared by Reactive Magnetron Sputtering

The effect of temperature during plasma nitriding on the properties of IN718 additively manufactured by laser beam powder bed fusion

Microstructural characterization of plasma nitrided austenitic stainless steel

Insights into plasma nitriding behaviour of M50NiL steel with different initial microstructures

Low-Temperature Plasma Nitriding for Austenitic Stainless Steel Layers with Various Nickel Contents Fabricated via Direct Laser Metal Deposition

Investigation of the thermal stability of Ni/C multilayers by X-ray methods

Evaluation of Microstructure and Hardness of Novel Al-Fe-Ni Alloys with High Thermal Stability for Laser Additive Manufacturing

Microstructure and mechanical properties of surface layer of M50NiL steel plasma nitrided

Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel

In Vitro Corrosion Behavior of TiN Layer Produced on Orthopedic Nickel–titanium Shape Memory Alloy by Nitrogen Plasma Immersion Ion Implantation Using Different Frequencies

Effects of Initial Microstructure on the Low-Temperature Plasma Nitriding of Ferritic Stainless Steel

Analysis of active screen low temperature plasma-assisted deposition of iron nitride thin films on silicon (100) substrate

Comparison of open-atmosphere nitriding on various metal surfaces triggered by a focused pulsed laser irradiation

Characterization and electrochemical behavior of a multilayer-structured Ti–N layer produced by plasma nitriding of electron beam melting TC4 alloy in Hank's solution

Microstructure evolution and vacuum tribological properties of surface nitriding layer on a TiZrAlV alloy fabricated by laser nitriding

Nanosized precipitates in H13 tool steel low temperature plasma nitriding

Kinetics analysis and enhancement mechanism of aluminum-enhanced plasma nitriding for 42CrMo steel