Abstract:Polycarbosilane (PCS) serves as a crucial precursor for silicon carbide (SiC) fibers and ceramics. However, both of the precursor and the resulting SiC ceramics are carbon-rich, which is often viewed as detrimental to their relevant high-temperature properties. In this work, PCS is modified using nanosized Si particles to improve SiC grain growth and reduce carbon content in the resulting SiC ceramics, and the structural evolution during the polymer–ceramic conversion process has been meticulously investigated. The findings reveal that the incorporation of nano-Si into PCS raises its actual ceramic yield and accelerates the organic-inorganic conversion process. This is attributed to the formation of a more crosslinked structure at 200 °C–350 °C, resulting from the reaction between the Si–OH groups in nanosized Si and the Si–H and Si–CH3 groups in PCS. The carbothermic reaction between nano-Si and the free carbon starts at approximately 1200 °C at the periphery of nanosized Si particles, and is accomplished at around 1400 °C. This leads to the formation of large-sized reactive β-SiC. Simultaneously, PCS-derived β-SiC with smaller sizes is also formed at 1300 °C–1400 °C. At 1600 °C–1800 °C, the growth of the reactive and the derived β-SiC in nano-Si-modified PCS is both accelerated due to a substantial decrease in the free carbon content. Consequently, the grain size of β-SiC is much larger than that of unmodified PCS. Additionally, the residual amorphous free carbon transforms into nanocrystalline carbon at around 1400 °C and evolves into graphite carbon at 1600 °C–1800 °C, which exhibits a more ordered structure with larger size compared to that in unmodified PCS.

Synthesis of Silicon Carbide Nanorods by Catalyst-Assisted Pyrolysis of Polymeric Precursor

Ultrafast growth of single-crystalline Si nanowires

Large Areas of Centimeters-Long SiC Nanowires Synthesized by Pyrolysis of a Polymer Precursor by a CVD Route

Synthesis of SiC nanorods using floating catalyst

Morphology-Controlled Synthesis of SiC Nanowires by Catalyst-Assisted Pyrolysis of Polymeric Precursor

Morphology Control of Si-Based Nanostructures by Catalyst-Assisted Pyrolysis of Preceramic Precursors

Catalyst-Assisted Pyrolysis of Polymeric Precursors: A New Method to Synthesize Low-Dimensional Nanomaterials

Growth and Mechanism of Network‐Like Branched Si3N4 Nanostructures

Continuous Synthesis and Characterization of Silicon Carbide Nanorods

Synthesis of Silicon Carbide Nanowires in a Catalyst-Assisted Process

Synthesis And Growth Mechanism Of Silicon Nitride Nanostructures

Study on polymeric precursor pyrolysis synthesis and growth mechanism of Si3N4 nanobelts

Growth of SiC nanowires/nanorods using a Fe–Si solution method

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Synthesis of Silicon Carbide Nano-Junctions in A Catalyst-Assisted Process

Synthesis of Silicon Carbide Nanorods Without Defects by Direct Heating Method

Preparation and Characterization of Bundled One-Dimensional Si3N4 Single-Crystalline Nanowires by Catalytic Pyrolysis of a Polymer Precursor

Improving SiC grain growth and reducing carbon content in pyrolyzed polycarbosilane using nanosized Si particles

A Simple Approach to Controllably Grow Network-Like Branched Single-Crystalline Si3n4 Nanostructures

Fabrication and characterization of pyrolytic carbons from phenolic resin reinforced by SiC nanowires with chain-bead structures

Adjusting the Morphology and Properties of SiC Nanowires by Catalyst Control