Abstract:In this study, a computational fluid dynamics (CFD) model was developed to predict all relevant phenomena occurring during a moist heat sterilization process at a high level of temporal and spatial resolution. The developed CFD model was used to simulate the distribution of, for example, pressure, temperature, and residual air within a large-scale industrial steam autoclave (multiphase flow models), which was not published until now. Moreover, the thermodynamic behavior and distribution of fluids and temperatures inside the sterilization load were simulated and were verified with measurements. Based on the obtained sterilization temperature profiles in connection with the sterilization environment (e.g., non-condensable gases, natural convection), bacterial inactivation could be simulated. A complete moist heat sterilization process was simulated, including all relevant phenomena inside an autoclave chamber and a Peritoneal Dialysis Bag System (PDBS), which represents a complex sterilization item. To verify the simulation results, simulated pressures and temperatures were compared with measurement data for both the autoclave chamber and the PDBS. The results show that the simulated and measured values were in excellent accordance. By using the novel CFD model, the distribution of steam and residual air inside the autoclave chamber, as well as the natural convection inside the sterilization load, could be precisely predicted. To predict the inactivation of Geobacillus stearothermophilus inside different moist heat environments, the CFD model was extended with bacterial inactivation kinetics based on measurement data. The simulation results clearly indicate that our developed CFD model can be used to predict the inactivation kinetics of bacteria, depending on the sterilization temperature profile of the sterilization process as well as the moist heat sterilization environment, and to resolve the kinetics in time and space. Therefore, the developed CFD model represents a powerful tool that might be used in the future to predict, for example, "worst case" locations for any given autoclave and sterilization load or any other relevant process parameter, enabling the operator to develop an effective sterilization process.

Numerical simulation of natural convection heating of canned food by computational fluid dynamics

Numerical Simulation of Transient Temperature and Velocity Profiles in a Horizontal Can During Sterilization Using Computational Fluid Dynamics

An investigation of deactivation of bacteria in a canned liquid food during sterilization using computational fluid dynamics (CFD)

Numerical Simulation of Liquid Food Sterilization in a Still Can

Thermal Sterilization of Canned Food in a 3-D Pouch Using Computational Fluid Dynamics

A computational and experimental study of heating and cooling cycles during thermal sterilization of liquid foods in pouches using CFD

Modeling Heat Transfer in Thermal Sterilization for Canned Foods

A computational fluid dynamics study on the effect of sterilization temperatures on bacteria deactivation and vitamin destruction

Development of A Heat Sterilization Simulation Platform for Canned Food

NUMERICAL EXPLORATION FOR CANNED FOOD DURING THE THERMAL STERILIZATION PROCESS

Thermal Behavior of CMC Solutions for Continuous-Flow Radio Frequency Pasteurization

Thermal Sterilisation Of Liquid Foods In A Sealed Container - Developing Simple Correlations To Account For Natural Convection

Thermal Behavior of CMC Solutions under Simulation of Radio Frequency Pasteurization

Natural Convection and Radiation Heat Transfer of Power-Law Fluid Food in Symmetrical Open Containers

CFD simulation of coupled heat and mass transfer through porous foods during vacuum cooling process

Numerical simulation of heat transfer during meat ball cooking and microbial food safety enhancement

Numerical Simulation of Safety Injection and Natural Circulation in Two Containers by Smoothed Particle Hydrodynamics on the Effects of Filling Levels and Thermal Diffusivities

A Method to Investigate Sterilization Processes and the Bacterial Inactivation Resolved in Time and Space

Numerical heat flow visualization analysis on enhanced thermal processing for various shapes of containers during thermal convection

CFD simulation of heat and moisture transfer for predicting cooling rate and weight loss of cooked ham during air-blast chilling process

Numerical Simulation of Turbulent Natural Convection in an Enclosure with a Curved Surface Heated from Below