Abstract:To study the influences of the cross-sectional shapes on the final depths of penetration, a series of experiments were carried out on the penetration of long-rod projectiles with the same cross-sectional area different cross-sectional shapes into semi-infinite metal targets. The cross-sectional shapes were machined to be circular, square and cross, respectively. These experiments were divided into two groups. In one group of experiments, the long-rod projectiles with the aspect ratio of 8 and 93W alloy cores penetrated into armor-steel target plates. In another group of experiments, the long-rod projectiles with the aspect ratio of 15 and 45 steel cores penetrated into the 45 steel target plates. Depths of penetration under different impact velocities were experimentally obtained for different cross-sectional shapes, aspect ratios, and materials of projectiles and targets, respectively. Experimental results display that the penetration abilities of the three kinds of long-rod projectiles with non-circular cross-section are higher than that of the long-rod projectiles with circular cross-section under the same working conditions. And among the four kinds of long-rod projectiles, the penetration ability of the long-rod projectiles with cross section is the highest, followed by that of the long-rod projectiles with square section. With the increase of the impact velocity, the penetration gains of the cross and square cross-section long-rod projectiles to the circular cross-section ones increase. The cross-section shape of craters penetrated by the triangular cross-section long-rod projectiles takes on arc triangle, and the cross-section shape of craters penetrated by the long-rod projectiles with square and cross sections, respectively, takes on approximate circle. After penetration of the three kinds of non-circular cross-section long-rod projectiles, cracks at certain angles with the axial direction appear in the mushroomed heads of the projectile bodies, which leading to less resistance encountered by the projectiles in the process of penetration. The reason, why the penetration abilities of three kinds of non-circular cross-section long-rod projectiles are higher than that of the circular-section long-rod projectiles, is their structural self-sharpening in the process of penetration.

Numerical Simulation and Study of Penetration of Long Rod Projectiles into New Pattern Composite Target

Study on Anti-Penetration Performance of Semi-Cylindrical Ceramic Composite Armor against 12.7 mm API Projectile

Experiment and numerical simulation of anti-penetration performance of composite structures

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

Research on structural design and anti-penetration performance of ceramic composite armor

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Research on anti-penetration performance of composite armor of steel/composite materials

Numerical Simulation of Penetration of Ceramic/Metal Composite Armour

Numerical simulation of the disk fragment impacting resistance of plate target

Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic

Numerical Simulation of Rigid Projectiles Penetration into Concrete Targets with Different Warhead Shapes

Numerical Simulation on Shaped Charge Jet Penetrating Single / Composite Structure of Target Plate

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Numerical Simulation Of High-Speed Projectile Oblique Penetration Into The Concrete Target

Numerical Analysis of Deformation and Failure of Penetration into Concrete Target by Projectile

Numerical Simulation of PELE Penetrating Composite Armor

Numerical Simulation On The Interference With High Velocity And Flat Head Penetrator By Lefp

Penetration Analysis of Driving Weapons Precursory Shaped Charge Based on LS-DYNA

Numerical simulation of the penetration resistance of ceramic composite armor with corrugated structure

Numerical simulation of steel tube array composite armor structure against rod projectile penetration

Experimental Study on Penetration of Non-Circular Cross-Section Long-Rod Projectiles into Semi-Infinite Metal Target