Abstract:Abstract The axial cyclone separator has simple structure, operates to reducing dust concentration in grain storehouses, and features low production cost, and convenient installation. Aiming to obtain the separation characteristics of an axial flow guide separator, the particle wall collision and the performance of multi-tubes were simulated with Fluent. The renormalization group (RNG) k − ε model was used to study the turbulent modeling and the user define function (UDF) was used to calculate the particle-wall collision. The simulation and experimental results were compared to verify the computation model. The results showed that the basic feature of the flow pattern remains stable and the separation efficiency of 800 kg/m 3 particles is higher than 2650 kg/m 3 particles when the inlet velocity increases from 2 to 5 m/s. When the inlet velocity was 5 m/s, the normal velocity restitution ratio had a significant effect on the efficiency, the separation efficiency of 167 μm particles changed from 76.74 to 97.93% and a smaller normal velocity restitution ratio had a higher the efficiency. In comparison, the efficiency remained unchanged when changing the tangential velocity restitution ratio. Furthermore, the effects of three target wall materials on the separation efficiency were investigated. And the simulated efficiency the of 296 μm particle of 2024 aluminum, 410 stainless steel and Ga1–4V titanium were 82.15, 79.52 and 77.53% respectively. Besides, effects of tube diameter on performances of cyclone separator were discussed and high intense collisions between particles and walls may occur in a small diameter of cyclone tube, causing deteriorated separation performance. Moreover, with the addition of the dust chamber, the efficiency of cyclone used in combination is slightly improved since the vortex in the exhaust pipe has been finely changed.

Numerical Study on the Flow Features of U-beam Inertial Separator

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Numerical Study of the Hydrodynamics Properties of U-Beam Inertial Separator

Experimental Study and Numerical Simulation of the Characteristics of a Percussive Gas–solid Separator

Experimental study of two-phase flow inside finned-tubes separator using 3-D-PDA

Numerical simulation of gas-solid separators used in circulating fluidized bed boilers

To characterize two-phase flows around finned tube by using 3D-PDA and numerical calculation

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical simulation of the effects of the internal components on the uniformity of the flow field in a tubular separator

Numerical Simulating the Gas-solid Flow in Square Cyclone With a Curved Inlet

Numerical Simulation Study on Separation Performance of Cyclone Separator Based on Fluent

Experimental Study on Two Different Gas-Liquid Separators Under Different Flow Patterns

To Characterize Two-Phase Flows Around a Finned Tube Using the Three-Dimensional Particle Dynamics Analyzer (PDA) and Numerical Calculation

Numerical Study of the Flow Field and Particle Separation Characteristics for a Diffusion Type Cyclone Separator

3-D Static Simulation of the Effect of Upward Flow Velocity on Separation Efficiency of Three-phase Separator in UASB Reactor

Numerical study on momentum transfer between droplets and carrier phase in wave type plate separators

Numerical simulation of the particle-wall collision strength and swirling effect on the performance of the axial flow cyclone separator

AN EXPERIMENTAL STUDY ON THE GAS-SOLID TWO-PHASE FLOW IN A SQUARE CYCLONE SEPARATOR WITH DOWNWARD GAS EXIT BY 3D-PDA

Experimental Study of A Finned Tubes Impact Gas-Solid Separator for Cfb Boilers

Numerical Simulation and Experimental Study on the Performance of Gas/Liquid Spiral Separator

Numerical Simulation of Multi-Tubular Bundle Tube Cyclone Separator