Abstract:Solid oxide fuel cells (SOFCs) have been attracting people's attention for their high energy conversion efficiency, good fuel compatibility, no precious metal catalysts, and pollution-free emissions. However, the high operating temperature (800-1200℃) of the traditional SOFC can reduce the long-term stability and cause the difficulties in either the selecting of material or the sealing of SOFC. Therefore, great efforts have been devoted to developing the intermediate temperature SOFC (IT-SOFC), which works at 600-800℃. In the IT-SOFC, the ionic conductivity of doped CeO2-based electrolyte has a significant advantage relative to that of the conventional yttria-stabilized zirconia (YSZ) electrolyte. For example, at 600℃, the ionic conductivity of Sm-doped CeO2 is 0.02 S/cm much higher than that of the traditional YSZ electrolyte (only 0.0032 S/cm). Therefore, the doped CeO2-based electrolyte is a very promising electrolyte for IT-SOFC.Recently, the co-doping of two different elements into CeO2 has become a hot research topic. The ionic conductivity of Sm3+ and Sr2+ co-doped CeO2 has proved to be nearly twice as high as that of Sm3+ doped CeO2 (SDC). However, the mechanism for the co-doping effect on the conductivity of CeO2 is not clear. In this paper, Sm3+ and Sr2+ co-doped CeO2 is systematically studied using the DFT+U method. The microscopic properties of the Sm3+ and Sr2+ co-doped CeO2 including electronic density of states, band structure, oxygen vacancy formation energy and oxygen vacancy migration energy and so on have been calculated and analyzed by comparing with those of the Sm3+ or Sr2+ single doped CeO2. The calculation results indicate that Sm3+ and Sr2+ co-doping has a synergistic effect on the performance improvement of CeO2-based electrolyte, which can not only suppress the electronic conductivity of doped CeO2 system, but also can reduce the oxygen vacancy formation energy on the basis of single doped CeO2. The existence of Sm3+ can help to reduce the trapping effect of Sr2+ on oxygen vacancies, meanwhile the addition of Sr2+ can further reduce the minimum oxygen vacancy migration energy on the basis of SDC. Calculations by the climbing image nudged elastic band (CINEB) method indicate that the oxygen vacancy migration energy of the co-doped system can reach as low as 0.314/0.295 eV, which is lower than the minimum oxygen vacancy migration energy of SDC. Our research reveals the synergistic mechanism for Sm3+ and Sr2+ co-doping effect on the conductivity of CeO2, which is of great instructive significance for the further research and development of other high-performance co-doped electrolyte materials in IT-SOFC.

The effect of Pr co-dopant on the performance of solid oxide fuel cells with Sm-doped ceria electrolyte

Intermediate-temperature Electrochemical Performance of a Polycrystalline PrBaCo2O5+δ Cathode on Samarium-Doped Ceria Electrolyte

Structural and ionic conduction study of Sm–Pr co-doped ceria electrolyte materials for LT-SOFC applications

Effects of doped ceria conductivity on the performance of La 0.6Sr 0.4Co 0.2Fe 0.8O 3-δ cathode for solid oxide fuel cell

Effects of Co-Doped Barium Cerate Additive on Morphology, Conductivity and Electrochemical Properties of Samarium Doped Ceria Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

DFT+U Calculation of Sm3+ and Sr2+ Co-Doping Effect on Performance of CeO2-based Electrolyte

Effects of Sm and Gd co-doping on ionic conductivity of ceria-based electrolyte materials

Characteristics of Li2CO3 as sintering aid for Ce0.8Sm0.2O2−δ electrolyte in solid oxide fuel cells

The Co-Doping Effect of Sm and in on Ceria for Electrolyte Application in IT-SOFC

Preparation and properties of rare earth co-doped Ce0.8Sm0.2-xYxO1.9 electrolyte materials for SOFC

Effect of Pr doping on structural, electrical and dielectric properties of ceria based system as electrolyte for electrochemical device

Evaluating the effect of Pr-doping on the performance of strontium-doped lanthanum ferrite cathodes for protonic SOFCs

Densification of Sm0.2Ce0.8O1.9 with the Addition of Lithium Oxide As Sintering Aid

Effect of sintering aids on sintering kinetic behavior of praseodymium doped ceria based electrolyte material for solid oxide cells

Preparation of Sm0.2Ce0.8O1.9 Membranes on Porous Substrates by a Slurry Spin Coating Method and Its Application in IT-SOFC

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Superionic Conductivity of Sm3+, Pr3+, and Nd3+ Triple-Doped Ceria through Bulk and Surface Two-Step Doping Approach

Advancing Solid Oxide Fuel Cell Performance: Enhanced Electrochemical Properties of Pr1- xCaxBaFe2O5+δ Nanofiber Cathodes via Ca Doping

Effect of Gd (Sm) doping on properties of ceria electrolyte for solid oxide fuel cells

Effect Of Samaria Doped Ceria Impregnation On The Electrochemical Performance Of Strontium Doped Lanthanum Chromium Manganite Anode For Solid Oxide Fuel Cells

The Influence of Cr-Additives on the Polarization Resistance of Praseodymium-Doped Ceria Cathodes for Solid Oxide Fuel Cells