Abstract:Crystallinity (Xc) is a crucial crystallographic factor that related closely to mechanical properties in linear polyethylene or high density polyethylene (HDPE), whose molecular weight (MW) is at a 105 level. However, as a typically intractable-processing polymer, the structure-property relationship concerned Xc is still ambiguous for ultrahigh molecular weight polyethylene (UHMWPE) with MW﹥1.5×106. The reason is that high entanglement density hinders chain mobility in the course of UHMWPE crystallization, thus crystalline degree in UHMWPE molding parts is difficult to be artificially modulated within a wide scope. In this study, low chain-entanglement status of UHMWPE melt was achieved by (1) utilizing lowly entangled nascent UHMWPE synthesized via the single-site Ziegler-Natta catalyst, and (2) decreasing the sintered temperature. It is impressive that partial disentanglement reserved in the melt is favorable for obtaining higher crystallinity. Meanwhile, an isothermal crystallization treatment was additionally adopted to further improve the capacity of regulating crystallization after the traditional two-step sintering procedure. By a combination of varying the initial entanglement in nascent powders, sintering temperature, isothermal crystallization duration, and molecular weight of UHMWPE, the Xc of the compression-sintered products has been successfully adjusted in the relatively broad range of 29%≦ Xc≦65%, which offered an opportunity to validly survey the correlation between mechanical property and crystallinity. Particular attention was paid to the yield strength. A linear master straight-line can be plotted as yield strength vs. Xc for all of the samples inspected, indicating crystallinity also plays a dominant role on mechanical performances of UHMWPE sintering parts, as same in the case of HDPE. However, the mechanical reinforcement induced by increment of Xc in UHMWPE is more efficient than in HDPE. The yield strength of UHMWPE is much higher than that of HDPE at the same Xc, indicating the amorphous phase or entanglements in UHMWPE is crucial to determine the mechanical property. These findings are of significance for guiding the manufacturing of high-performance UHMWPE materials via crystallization manipulation.

Study of a skin-core type of crystallinity distribution within polyethylene specimen crystallized under high pressure

Studies on Nonisothermal Crystallization of Ultra–high Molecular Weight Polyethylene in Liquid Paraffin

Understanding structure-mechanics relationship of high density polyethylene based on stress induced lattice distortion

Towards a better understanding of the crystallization and melting behaviors of high-density polyethylene samples prepared from quasi-isothermal and stretching oriented localized melts

Coarse-Grained Simulations on Polyethylene Crystal Network Formation and Microstructure Analysis

Structure Evolution of Polyethylene-Plasticizer Film at Industrially Relevant Conditions Studied by In-Situ X-ray Scattering: the Role of Crystal Stress

Effects of Heating, Tensile, and High Pressure Treatments on Aggregate Structure of a Low Density Polyethylene

Electron Microscopy of High-Pressure Crystallized Poly(ethylene Terephthalate)

Nanostructure Evolution of Isotropic High-Pressure Injection-Molded Uhmwpe During Heating

Structural evolution of ultra-high molecular weight polyethylene gel film stretching at different temperatures with reservation of shish crystals

Crystalline Structures, Melting, and Crystallization of Linear Polyethylene in Cylindrical Nanopores

From Molecular Entanglement Network to Crystal-Cross-Linked Network and Crystal Scaffold During Film Blowing of Polyethylene: an in Situ Synchrotron Radiation Small- and Wide-Angle X-ray Scattering Study

Effect of Crystallinity of Polyethylene with Different Densities on Breakdown Strength and Conductance Property

Crystal structure changes during isothermal crystallization, cooling and heating of linear polyethylene

Effect of Pan-Milling Stress on Crystal Structures of High Density Polyethylene

Pursuit of the correlation between yield strength and crystallinity in sintering-molded UHMWPE

Studies On The Nature Of The Macromolecular Condensed State Of "Nascent" Ultra High Molar Mass Polyethylene

Effect of Crystallization Conditions on Melt Recrystallization Behavior of PE-UHMW

Crystallization Behavior of Blends of High‐density Polyethylene with Novel Linear Low‐density Polyethylene

Reversed thermal stability between stress-induced melting and recrystallized crystallites and original inclined ones in moderately stretched ultra high molecular weight polyethylene and high density polyethylene

The High-Pressure Crystallization and Annealing Behaviors of Polyethylene Terephthalate Oligomer