Abstract:Metal matrix composites is a new type of engineering materials with broad prospects. The strengthening effect of microstructure of matrix is one of main strengthening mechanisms, and it has been widely studied by theoretical analysis [1‐3]. However, the experimental study on the actual property of matrix of composite has been less reported. In this paper, the technique of X-ray diffraction was used to measure the effective bearing of matrix in composite, and the relation between stress and strain of matrix of a 20vol%SiCw/Al composite was determined for the purpose to study the actual properties of matrix in composite. The experimental material is a squeeze casting 20vol%SiCw/Al composite. The length and diameter of whisker is 5‐15 µm and 0.2‐1 µm, respectively. The matrix material is a 99.8wt%%Al pure aluminum. In addition, the pure aluminum material was selected to compare with the composite. The dimension of sample is: length 50 mm, thickness 2 mm and effective width 6 mm. The geometrical relation in X-ray stress measurement is shown in Fig. 1. The surface of sample should be etched by 20%NaOH solution with 100 µm of thickness to relieve the effect of machining layer near surface in the process of stress measurement. The tensile tests were carried out in the horizontal mechanical equipment, and the direction of tensile strain was along the direction of Y-axis of Fig. 1. The strains along this direction of sample were measured using the strain gage. With the X-300 type of X-ray stress analyzer, the effective bearing stresses of matrix in composite during tensile deformation were determined. The matrix bears the triaxial stress when the composite is applied a uniaxial stress [4‐6], and the effective bearing stress of matrix is the key-factor to lead the plastic strain of matrix in composite. The effective bearing stress of matrix in composite in Fig. 1 can be expressed as [6]:

Determination of the relation between stress and strain of matrix in SiCw/Al composite by X-ray diffraction

A Study of the Residual Stress and Its Influence on Tensile Behaviors of Fiber-Reinforced Sic/Al Composite

Characterization of Aluminium Matrix Compositesreinforced by Al–Cu–Fe-Cr Quasicrystalline Particles

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Bending Properties and Failure Mechanism of Continuous W-Core-SiC Fiber-Reinforced 2024 and 6061 Aluminum Matrix Composites

In situ mechanical testing of an Al matrix composite to investigate compressive plasticity and failure on multiple length scales

Enhanced stress concentration sensitivity of SiCp/Al composite with network architecture

Damage behavior and mechanism of SiCp/Al composites under biaxial tension

Effect of off-axis angle on mesoscale deformation and failure behavior of plain-woven C/SiC composites with digital image correlation

Quantitative determination of the stability of SiC whisker in reaction-bonded/hot-pressed Si3N4 composites by X-ray diffraction

Macro-Micro Relationship of Dimensional Changing Behavior of Aluminum Matrix Composite

Investigation of Mechanical and Tribological Properties of Al–7 Wt.% Si alloy Metal Matrix Composites Reinforced with SiC

Effect of strain rate on the tensile properties of mini-SiC/SiC composites

Investigation of Stress and Wear Analysis for Aluminum-based Metal Matrix Composite Reinforced Silicon Carbide using ANSYS Software Package

Damage accumulation during high temperature fatigue of Ti/SiC$_f$ metal matrix composites under different stress amplitudes

Experimental and Numerical Investigations of Tensile Properties of SiC Particle‐Reinforced Composites

Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Effect of Diffusion on the Ultimate Axial Load of Complex-Shaped Al-SiC Samples: A Molecular Dynamics Study

Cold Sprayed Additive Manufacturing of SiC/Al Metal Matrix Composite: Synthesis, Microstructure, Heat Treatment and Tensile Properties

Microstructures, mechanical and strain hardening properties of squeezed 6016Al matrix composites synthesized under electromagnetic field