Abstract:Calcium silicate hydrate (C-S-H) is the main constituent of hydrated cement paste and determines its cohesive properties. Because of the environmental impact of cement industry, it is more and more common to replace a part of the clinker in cement by secondary cementitious materials (SCMs). These SCMs are generally alumina-rich and as a consequence some aluminum is incorporated into the C-S-H. This may have consequences on the cohesion and durability of the material, and it is thus of importance to know the amount and the location of Al in C-S-H and what the parameters are that control these features. The present paper reports the (29)Si and (27)Al MAS NMR analyses of well-characterized C-A-S-H samples (C-S-H containing Al). These samples were synthesized using an original procedure that successfully leads to pure C-A-S-H of controlled compositions in equilibrium with well-characterized solutions. The (27)Al MAS NMR spectra were quantitatively interpreted assuming a tobermorite-like structure for C-A-S-H to determine the aluminum location in this structure. For this purpose, an in-house written software was used which allows decomposing several spectra simultaneously using the same constrained spectral parameters for each resonance but with variable intensities. The hypothesis on the aluminum location in the C-A-S-H structure determines the proportion of each silicon site. Therefore, from the (27)Al NMR quantitative results and the chemical composition of each sample, the intensity of each resonance line in the (29)Si spectra was set. The agreement between the experimental and calculated (29)Si MAS NMR spectra corroborates the assumed C-A-S-H structure and the proposed Al incorporation mechanism. The consistency between the results obtained for all compositions provides another means to assess the assumptions on the C-A-S-H structure. It is found that Al substitutes Si mainly in bridging positions and moderately in pairing positions in some conditions. Al in pairing site is observed only for Ca/(Si+Al) ratios greater than 0.95 (equivalent to 4 mmol.L(-1) of calcium hydroxide). Finally, the results suggest that penta and hexa-coordinated aluminum are adsorbed on the sides of the C-A-S-H particles.

STUDY ON THE INFLUENCE OF THE CRYSTAL ALUMINUM CHLORIDE ON THE MECHANICAL PROPERTIES OF THE GREEN CHEMICAL SAND-FIXING BRICK

Effect of Concentration of Aluminum Salts on Stability of Aluminosilicate Sand Stabilization Material

A Study on the Modified Aluminosilicate Sand Stabilization Material

Effect of Calcium to Silicon Ratio on the Microstructure of Hydrated Calcium Silicate Gels Prepared under Medium Alkalinity

Effect of Aluminum Incorporation on the Reaction Process and Reaction Products of Hydrated Magnesium Silicate

Aluminum-Induced Interfacial Strengthening in Calcium Silicate Hydrates: Structure, Bonding, and Mechanical Properties

Uniaxial tensile study of calcium aluminosilicate hydrate (C-A-S-H): Structure, dynamics and mechanical properties

27Al and 29Si solid-state NMR characterization of calcium-aluminosilicate-hydrate

Effects of Sodium Ions on Synthesized Alkali Silica Reaction Gels

Al Content Effect on Microstructure and Strength in Calcium Aluminosilicate Hydrate Chain Integration

Abnormal behavior of silica doped with small amounts of aluminum

Effect of Aluminium Substitution on Physical Adsorption of Chloride and Sulphate Ions in Cement-Based Materials

Quantitative studies on the microstructure of ternary CaO–Al2O3–SiO2 glasses by Raman spectroscopy, 27Al MAS NMR and quantum chemistry ab initio calculation

Effect of Tricalcium Aluminate on the Properties of Tricalcium Silicate-Tricalcium Aluminate Mixtures: Setting Time, Mechanical Strength and Biocompatibility

The Effect of Si/Al on Mechanical Properties and Fracture Behavior of Stainless Steel Mesh/Crp Reinforced Geopolymer Composites

Study on the chloride ion binding rate of sulfoaluminate cement mortars containing different mineral admixtures

Regulations on the Hydration, Morphology, and Sulfate-Attack Resistivity of C3A with Micro/nano-Silica Particles

Insight Into the Strengthening Mechanism of the Al-Induced Cross-Linked Calcium Aluminosilicate Hydrate Gel: A Molecular Dynamics Study

Effect of Silica Coating on Fracture Strength of Glass-Infiltrated Alumina Ceramic Cemented to Dentin.

Setting Properties and Biocompatibility of Dicalcium Silicate with Varying Additions of Tricalcium Aluminate.

Molecular Dynamics Study on Coupled Ion Transport in Aluminum-Doped Cement-Based Materials