Abstract:Summary In a naturally fractured reservoir, natural fractures can not only provide main paths for fluid flow and increase its permeability but also complicate flow behavior and production performance. Interwell tracer tests have been widely applied to estimate the petrophysical properties; however, limited attempts have been made to accurately identify the natural fracture networks. In this study, the newly proposed numerical models have been verified and used to characterize the fracture distributions in a naturally fractured reservoir conditioned to tracer transport behavior. The stochastic fracture modeling approach is implemented to generate the randomly distributed natural fractures which are dealt with the embedded discrete fracture model (EDFM) while ensuring its sufficient accuracy. To be specific, the matrix domain is discretized using the structured grids, within which each embedded fracture is divided into a series of segments. Subsequently, nonneighboring connections (NNCs) allow us to couple the flow of fluid and tracer between the nonneighboring grid cells, while the historical tracer profiles are matched to delineate the geometry and properties of the fractures by taking multiple tracer transport mechanisms into account. Furthermore, the influences of fracture number, fracture length, fracture orientation, and tracer dispersion on the tracer production concentration have been investigated through sensitivity analysis. The response of an interwell tracer model is sensitive to the fracture parameters rather than tracer properties. A fracture network with its orientation parallel to the mainstream direction will cause the earliest tracer breakthrough. The tracer breakthrough time with an average fracture length of 40 m is 110 days earlier than that with a mean fracture length value of 10 m, while the tracer production peak concentration for the former is nearly two times higher than for the latter. A larger fracture number results in an earlier tracer breakthrough, and an intermediate fracture number will lead to the highest tracer production concentration. Additionally, the newly developed model has been validated through its comparison with the commercial ECLIPSE simulator and then extended to field applications to identify the possible fracture distributions by simulating multiwell tracer tests in the Midale field. The flexible and pragmatic EDFM-based method developed in this study can model the interwell tracer flow behavior as well as characterize the properties and geometries of the natural fractures with better accuracy and calculation efficiency in comparison with other fracture simulation methods (e.g., local grid refinement method).

Fractured Reservoir Modeling Method Based on Discrete Fracture Network Model

Fine Modeling of Multiscale Fracture Cavity Fusion in Fault Solution Reservoirs Based on Multiscale Discrete Crack Modeling Method

Algorithmic approach to discrete fracture network flow modeling in consideration of realistic connections in large-scale fracture networks

A fracture modeling method for ultra-deep reservoirs based on geologic information fusion: an application to a low porosity sandstone reservoirs in X gas field of a basin in western China

An IFS-based fractal discrete fracture network for hydraulic fracture behavior of rock mass

Field-Scale Modeling of Interwell Tracer Flow Behavior to Characterize Complex Fracture Networks Based on the Embedded Discrete Fracture Model in a Naturally Fractured Reservoir

Discrete fracture modeling of deep tight sandstone reservoir based on convergent multi-information—a case study of KX gas field in Tarim Basin

Comparative Study on Interconnectivity Between Three-Dimensional and Two-Dimensional Discrete Fracture Networks: A Perspective Based on Percolation Theory

A precise modeling method of three‐dimensional discrete fracture network based on rectangular joint model

Coupled Geomechanics and Fluid Flow Modeling for Petroleum Reservoirs Accounting for Multi-Scale Fractures

An Integrated quantitative modeling approach for fault-related fractures in tight sandstone reservoirs

Numerical Modeling of Natural Fracture Distributions in Shale

Comparative study on hydraulic fracturing using different discrete fracture network modeling: Insight from homogeneous to heterogeneity reservoirs

Discrete Fracture Network Generation from Microseismic Data Using Moment-Tensor Constrained Hough Transforms

A multifractal geometric model for estimating spontaneous imbibition in an unsaturated fractured core-scale network in a low-permeability reservoir

Numerical investigation of the fracture network morphology in multi-cluster hydraulic fracturing of horizontal wells: A DDM-FVM study

An Efficient Hybrid Model for 3D Complex Fractured Vuggy Reservoir Simulation

Discrete-Fracture-Network Generation from Microseismic Data by Use of Moment-Tensor-And Event-Location-Constrained Hough Transforms

Enhancing Fracture Network Characterization: A Data-Driven, Outcrop-Based Analysis

Methodology and application of shale-reservoir natural fracture modeling based on microseismic monitoring data

Numerical Simulation of Influencing Factors of Hydraulic Fracture Network Development in Reservoirs with Pre-Existing Fractures