Abstract:Purpose Hydrofracturing technology has been widely used in tight oil and gas reservoir exploitation, and the fracture network formed by fracturing is crucial to determining the resources recovery rate. Due to the complexity of fracture network induced by the random morphology and type of fluid-driven fractures, controlling and optimising its mechanisms is challenging. This paper aims to study the types of multiscale mode I/II fractures, the fluid-driven propagation of multiscale tensile and shear fractures need to be studied. Design/methodology/approach A dual bilinear cohesive zone model (CZM) based on energy evolution was introduced to detect the initiation and propagation of fluid-driven tensile and shear fractures. The model overcomes the limitations of classical linear fracture mechanics, such as the stress singularity at the fracture tip, and considers the important role of fracture surface behaviour in the shear activation. The bilinear cohesive criterion based on the energy evolution criterion can reflect the formation mechanism of complex fracture networks objectively and accurately. Considering the hydro-mechanical (HM) coupling and leak-off effects, the combined finite element-discrete element-finite volume approach was introduced and implemented successfully, and the results showed that the models considering HM coupling and leak-off effects could form a more complex fracture network. The multiscale (laboratory- and engineering-scale) Mode I/II fractures can be simulated in hydrofracturing process. Findings Based on the proposed method, the accuracy and applicability of the algorithm were verified by comparing the analytical solution of KGD and PKN models. The effects of different in situ stresses and flow rates on the dynamic propagation of hydraulic fractures at laboratory and engineering scales were investigated. when the ratio of in situ stress is small, the fracture propagation direction is not affected, and the fracture morphology is a cross-type fracture. When the ratio of in situ stress is relatively large, the propagation direction of the fracture is affected by the maximum in situ stress, and it is more inclined to propagate along the direction of the maximum in situ stress, forming double wing-type fractures. Hydrofracturing tensile and shear fractures were identified, and the distribution and number of each type were obtained. There are fewer hydraulic shear fractures than tensile fractures, and shear fractures appear in the initial stage of fracture propagation and then propagate and distribute around the perforation. Originality/value The proposed dual bilinear CZM is effective for simulating the types of Mode I/II fractures and seizing the fluid-driven propagation of multiscale tensile and shear fractures. Practical fracturing process involves the multi-type and multiscale fluid-driven fracture propagation. This study introduces general fluid-driven fracture propagation, which can be extended to the fracture propagation analysis of potential fluid fracturing, such as other liquids or supercritical gases.

Fine Modeling of Multiscale Fracture Cavity Fusion in Fault Solution Reservoirs Based on Multiscale Discrete Crack Modeling Method

An Integrated quantitative modeling approach for fault-related fractures in tight sandstone reservoirs

Fractured Reservoir Modeling Method Based on Discrete Fracture Network Model

Coupled Geomechanics and Fluid Flow Modeling for Petroleum Reservoirs Accounting for Multi-Scale Fractures

A fracture modeling method for ultra-deep reservoirs based on geologic information fusion: an application to a low porosity sandstone reservoirs in X gas field of a basin in western China

Multi-Scale Investigations on the Geometries of Hydraulic Fractures in Conglomerate Reservoirs

Fracture-vuggy carbonate reservoir characterization based on multiple geological information fusion

A multi-resolution approach to hydraulic fracture simulation

An Efficient Hybrid Model for 3D Complex Fractured Vuggy Reservoir Simulation

Forward Modeling of Natural Fractures within Carbonate Rock Formations with Continuum Damage Mechanics and Its Application in Fuman Oilfield

Generalized multiscale multicontinuum model for fractured vuggy carbonate reservoirs

MULTISCALE AND MULTIPHASE MODELING OF FLOW BEHAVIOR IN DISCRETE FRACTURE NETWORKS FOR TIGHT OIL RESERVOIRS

The study on modeling and simulation of shale multi-scale matrix-fracture system

Dual bilinear cohesive zone model-based fluid-driven propagation of multiscale tensile and shear fractures in tight reservoir

A Dual-Grid, Implicit, and Sequentially Coupled Geomechanics-and-Composition Model for Fractured Reservoir Simulation

A New Approach to the Modeling of Hydraulic-Fracturing Treatments in Naturally Fractured Reservoirs

Simulation of the rock meso-fracturing process adopting local multiscale high-resolution modeling

Numerical investigation of the fracture network morphology in multi-cluster hydraulic fracturing of horizontal wells: A DDM-FVM study

An Integrated Approach for History Matching of Multiscale-Fracture Reservoirs

Methodology and application of shale-reservoir natural fracture modeling based on microseismic monitoring data

A Hybrid Embedded Discrete Fracture Model and Dual-Porosity, Dual-Permeability Workflow for Hierarchical Treatment of Fractures in Practical Field Studies