Abstract:The optimization method of winding structure parameters of oil-immersed transformer is proposed to reduce the hot spot temperature of transformer and the metal conductor consumption based on the coupling calculation method of electromagnetic-fluid-thermal. Firstly, according to the electrical and structural parameters of the oil-immersed transformer, a 3D simulation model is established by using finite element software, and the distribution of the thermal field and the fluid field around the transformer as well as the fluid field and thermal field of the low-voltage winding are obtained. In order to accurately reflect the temperature rise distribution characteristics of the low-voltage winding, a 2D model of the low-voltage winding of the transformer was established considering the calculation efficiency and accuracy, and the thermal field and fluid field distribution of the two low-voltage winding models were compared and analyzed. The temperature error was less than 5.98?, which verified the accuracy of the equivalent model. On this basis, the hot spot temperature of low voltage winding under different structural parameters is obtained by combining the Latin hypercube experiment design and thermal field simulation method, and the response surface model of winding hot spot temperature and structural parameters is established. Taking the hot spot temperature of low voltage winding and the amount of metal conductor as optimization objectives, combined with the response surface model, the optimal solution set of Pareto is obtained by using NSGS-? optimization algorithm, and two kinds of optimal design results are obtained on the Pareto front surface. The results show that the hot spot temperature is reduced by 4.16% and the metal conductor consumption is reduced by 13.79% in scheme 1; the hot spot temperature is reduced by 0.51% and the metal conductor consumption is reduced by 28.46% in scheme 2. The research results have important guiding significance for the optimization of oil-immersed transformer.

Thermo-stress of Converter Loop Analysis by Three-dimensional Finite Element Method

Water Cooling System Design and Thermal Analysis for Electrical Vehicle Driving Motors

Analytical Modeling of Air-Cooling System for Multiple Discrete Device Parallel Converter

Temperature distribution analysis and mechanical property prediction of wire loops in the Stelmor air-cooling system

Thermo-mechanical Stress Analysis of Feed-Water Valves in Nuclear Power Plants

Study on the Fluid-Solid Coupling Heat Transfer in the Stator of Large Synchronous Condenser Considering Complex Transposition Structure

Heat dissipation performance analysis and structural parameter optimization of oil-immersed transformer based on flow-thermal coupling finite element method

Analysis and verification of electrodynamic force, thermal stress and current sharing for CRAFT converter structure design

Three-dimensional topology optimization of thermal-fluid-structural problems for cooling system design

Numerical investigation of the thermal performance of a loop thermosyphon considering dynamic condensation mass transfer time relaxation parameter

High‐heat Flux Flow and Heat Transfer Transitions in a Supercritical Loop: Numerical Verification and Correlation

CFD Investigating Flow and Heat Transfer Characteristics in a Natural Circulation Loop

Thermo-Mechanical Coupling Finite Element Analysis of Blast Furnace Copper Staves

Three-Dimensional Thermal-Stress Coupled Field's Numerical Simulation of the Maze Composite Cooling Structure Tile

Calculation on 3D Static Thermal-flied of Three-gorge Half-cooled Hydrogenerator Stator by Using Thermal-liquid Coupling Element

Near-Critical Natural Circulation Flows Inside an Experimental Loop: Stability Map and Heat Transfer

A novel dissipating heat structure of converter transformer RIP bushings based on 3-D electromagnetic-fluid-thermal analysis

Simulation calculation of fluid field- thermal field of oil-immersed transformer and optimization of winding structure parameters

Analysis of the Temperature and Stress Field in a Steam Turbine Bypass Valve Body

Thermal Stress Analysis of the Solidification Process of Francis Turbine Band Casting

Analysis of Fine Fault Electrothermal Characteristics of Converter Transformer Reduced-Scale Model