Abstract:Removal and sequestration of CO2 from flue gas has been proposed as one of the most reliable solutions to mitigate globe greenhouse emissions. Adsorption technology based on porous adsorbent is known to be one of the most efficient processes for the CO2 capture from flue gas. The key issue of this technology is to find the adsorbent with high adsorption capacity and selectivity for CO2. In this chapter, both the experimental and the computer simulation works about the CO2 adsorption behavior on porous materials in our laboratory were introduced. In the experimental works, the mesoporous materials such as MCM-41 and SBA-15 were selected as the fundamental adsorbent. After surface modification by aminosilane, the amine groups became active centers and the CO2 adsorption capacity was obviously increased due to the chemisorption. It is shown that the dual amine groups of AEAPMDS had better effect on CO2 adsorption than the single amine group of APTS. The best CO2 adsorption capacity of MCM-41-AEAPMDS was 2.20 mmol.g(-1) at room temperature. Another effective way was incorporation metal Mg into the mesoporous materials. By various impregnating or doping methods, such as the co-condensation, the dispersion with the enhancement of Al3+ or amine, and the ionic exchange, a suitable amount of Mg2+ can be successfully introduced into MCM-41 and SBA-15, which effectively increased the CO2 adsorption capacity. Different pore structures had their corresponding optimized methods, the real reason behind was the highly dispersed MgO state in the channels. The best CO2 adsorption capacities of Mg-Al-SBA-15-D1 and Mg-EDA-MCM-41-D10 were about 1.35 mmol.g(-1). In the simulation works, some novel porous materials such as the micro/mesoporous composite, the covalent organic frameworks, the metal organic framework and the zeolitic imidazolate frameworks were selected as the potential adsorbents for the CO2 capture. The CO2 adsorption behavior of the zeoilte of MFI, the mesoporous MCM-41 and the micro/mesoporous composite of MFI/MCM-41 were simulated and compared. It is revealed that the micro/mesoporous composite had better performances on the CO2 adsorption capacity and selectivity at high pressure, as well as the diffusion performance.

Computer Simulation for Adsorption of Co2, N-2 and Flue Gas in A Mimetic Mcm-41

Molecular Simulation of MCM-41: Structural Properties and Adsorption of CO2, N2 and Flue Gas

Experimental And Computer Simulation Studies For The Adsorption Separation Of Co2 From Flue Gas By 5a-Mcm-41 Micro/Mesoporous Composite

Atomistic Simulations for Adsorption and Separation of Flue Gas in MFI Zeolite and MFI/MCM-41 Micro/mesoporous Composite

Co2 Adsorption on Porous Materials: Experimental and Simulation Study

Computer Simulation of Adsorption and Separation of CO2/CH4 in Modified COF-102

Equilibrium and Diffusion of CO2 Adsorption on Micro-Mesoporous NaX/MCM-41 Via Molecular Simulation

Molecular Simulation Of Ch4, Co2, H2o And N-2 Molecules Adsorption On Heterogeneous Surface Models Of Coal

Adsorption and Separation of CO2/CH4 Mixtures Using Nanoporous Adsorbents by Molecular Simulation

Molecular simulation studies of CO2 adsorption by carbon model compounds for carbon capture and sequestration applications

Influence Of Moisture On Co2 Separation From Gas Mixture By A Nanoporous Adsorbent Based On Polyethylenimine-Modified Molecular Sieve Mcm-41

Grand canonical Monte Carlo simulation of the adsorption and separation of carbon dioxide and methane using functionalized Mg-MOF-74

Molecular Simulation of Adsorption of CO2 from a Combustion Exhaust Mixture of Zeolites with Different Topological Structures

Dynamic Properties in CO2 Adsorption on Amine-Modified MCM-41

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

Computational screening of metal–organic frameworks for separation of CO2 and N2 from wet flue gas

Competitive sorption of CO2/CH4 and CO2 capture on modified silica surfaces: A molecular simulation

Computational Study Of Adsorption And Separation Of Co2, Ch4, And N-2 By An Rht-Type Metal-Organic Framework

Static and Dynamic Simulation of Single and Binary Component Adsorption of CO2 and CH4 on Fixed Bed Using Molecular Sieve of Zeolite 4A

Adsorption and Separation of Co2/Ch4/N-2 Binary Mixtures in an Ordered Mesoporous Carbon Material Cmk-3

Molecular Simulation Study of the Adsorption and Diffusion of a Mixture of CO2/CH4 in Activated Carbon: Effect of Textural Properties and Surface Chemistry