Abstract:Three commercial metallocene-catalyst synthesized short-chain branched polyethylene (SCBPE) samples with similar molecular weights and molecular weight distributions were investigated in terms of their molecular structural (comonomer sequences and compositions) inhomogeneity and crystal morphology. Two of these samples [SCBPE(BI) and SCBPE(B2)] contained different ratios of a butene comonomer (20.7 and 26.8 SCB/1000 carbons, respectively), while the third sample, SCBPE(HI. contained a branched hexane comonomer (7.8 SCB/1000 carbons). A linear PE fraction was also investigated for comparison. Differential scanning calorimetry (DSC) results indicate that multiple-step isothermal (thermal segregation) experiments lead to multiple endothermic melting processes in these SCBPEs during heating, a phenomenon that was not observed In the linear PE. Wide-angle X-ray diffraction (WAXD) experiments show that all of these SCBPEs possess an orthorhombic crystal lattice with different crystallinities. Linear coefficients of thermal expansion along both the a- and b-axes of the PE crystals were also determined using WAXD at different temperatures. This lateral lattice expansion is critically associated with the comonomer size and composition ratio of the SCB series. Small-angle X-ray (SAXS) scattering results of the thermal segregated samples obtained during heating required a differential scattering data treatment. It was found that the long period for each isothermal crystallization step was different and increased with increasing temperature. By increasing the comonomer composition at a constant temperature, the long period was also increased, although the thickness of the crystal lamellae decreased. This was due to an increase of the noncrystalline layer thickness between two neighboring lamellae. The crystalline morphology was observed under transmission electron microscopy (TEM). During multiple-step isothermal crystallization. the crystalline morphology exhibited a clearly separated lamellar domain texture. All of the experimental results presented suggest that a phase separation occurs during multiple-step crystallization due to the inhomogeneity that exists in there SCBPE molecular structures. These samples may thus possess an intermolecular heterogeneity in comonomer composition and sequence.

Study on molecular chain heterogeneity of linear low-density polyethylene by cross-fractionation of temperature rising elution fractionation and successive self-nucleation/annealing thermal fractionation

Stereochemical Heterogeneity of Biodegradable Poly(L-Lactide) Homopolymer As Revealed by Temperature Rising Elution Fractionation and Successive Self-Nucleation/Annealing Thermal Fractionation

Characterization on the Chain Heterogeneity of L-Lactide and Epsilon-Caprolactone Copolymers

Characterization of Intramolecular Composition Heterogeneity of Metallocene-Based and Conventional Ethylene-Butene Copolymers Using Tref/Dsc

Study of Polyethylene Solution Fractionation and Resulting Fractional Crystallization Behavior

COMPOSITION HOMOGENEITY OF METALLOCENE-BASED LLDPE

Improved Thermal Fractionation Technique for Chain Structure Analysis of Ethylene/α-Olefin Copolymers

Molecular Heterogeneity of Metallocene Short-Chain Branched Polyethylenes and Their Fractions

Effect of composition distribution on miscibility and co-crystallization phenomena in the blends of low density polyethylene with conventional and metallocene-based ethylene–butene copolymers

Study of the Fine Crystalline Structure of Polyethylenes Via Annealing and Thermal Fractionation

Crystallization and Fracture Behaviors of High‐density Polyethylene/linear Low‐density Polyethylene Blends: the Influence of Short‐chain Branching

CRYSTAF, DSC and SAXS Study of the Co-Crystallization, Phase Separation and Lamellar Packing of the Blends with Different Polyethylenes

Lateral Habits of Single Crystals of Metallocene-Catalyzed Low Molecular Weight Short Chain Branched Polyethylene from the Melt

Polydispersity of Ethylene Sequence Length in Metallocene Ethylene/α‐olefin Copolymers. I. Characterized by Thermal‐fractionation Technique

Thermorheology and crystallization behaviors of polyethylenes: Effect of molecular attributes

Nonisothermal Crystallization Kinetics of Ethylene-Butene Copolymer/Low-Density Polyethylene Blends

Microstructure characterization of one high-speed extrusion coating polyethylene resin fractionated by solvent gradient fractionation

Structural And Morphological Inhomogeneity Of Short-Chain Branched Polyethylenes In Multiple-Step Crystallization

Molecular weight dependence of melt crystallization behavior and crystal morphology of low molecular weight linear polyethylene fractions

Co-crystallization of blends of high-density polyethylene with linear low-density polyethylene: An investigation with successive self-nucleation and annealing (SSA) technique

Tearing properties, crystallization behavior, microstructure, and morphology of LLDPE with different short branched chain distributions