Abstract:Computer-Aided Design (CAD) tools are extensively used throughout all of the steps in a VLSI design flow. The physical design domain is one of the three domains that are conceptually abstracted in representing a VLSI design flow. This research work focuses on three areas in VLSI physical design domain: clock tree design and buffer insertion, interconnect model order reduction and LVS verification. First, an optimal buffer insertion for clock delay and skew minimization algorithm is developed based on the theory that the minimal clock delay can be obtained by equalizing derivatives of a convex function, and the minimal clock skew can be achieved by equalizing delay functions of different source-to-sink paths. Experimental results show that the presented algorithm achieves both minimal delay and skew in real clock tree design. Further, an automatic clock tree design algorithm is developed for realizing the pre-specified clock arrival time requirements that often occur in an IP block based design environment. In this proposed strategy, planar clock routing and buffer insertion are carried out simultaneously to minimize clock delay and skew, and a full waveform simulation is applied to ensure the signal integrity necessary for high-speed VLSI design. Second, an efficient balanced truncation realization algorithm is presented for interconnect model order reduction. This algorithm shows that there is no need to solve the whole Lyapunov equation for controllability and observability grammians before obtaining approximation to their predominant spaces, and a linear order reduction algorithm can be achieved by extending the O(n) Krylov Subspace Oblique Projection method. Finally, a unique LVS methodology is proposed for the verification of a quad-core microprocessor designed with a triple-well 90-nm CMOS technology. Due to the IP reuse, the standard LVS flow is incapable of handling the additional design complexity in verifying the LVS for the chip designed with multiple power domains. This proposed LVS strategy consists of two phases. The first phase involves verifying LVS at the block level as well as the full-chip level. The second phase aims at verifying the integrity of the multi-power-domain power grid. The proposed LVS methodology was successfully verified by real silicon.

Simulation and design of AVR processor based on VLSI platform

Simulation and Design of MIPS Processor Based on VLSI Platform

Design of VxWorks-based High-performance Embedded Control Platform

Design of a Media-Enhanced and Reconfigurable RISC ,Microprocessor

Research and Implementation of Virtual Processor X86

A novel component-based hardware-software co-simulation system based on OR1200

Design of Multi-serial Communication for Flight Controlling Computer Based on FPGA

Modeling and simulation of virtual machine based on FPGA platform

A multi-FPGA based platform for emulating a 100m-transistor-scale processor with high-speed peripherals (abstract only)

A C-based RTL design verification methodology for complex microprocessor

Hierarchical Timing-driven Layout Based on .25um Technology

Embedded System Verification and Software Development Environment Based on Virtual Processor

A Fast Multi-Core Virtual Platform and Its Application on Software Development

Virtual-Peripheral-in-the-Loop : A Hardware-in-the-Loop Strategy to Bridge the VP/RTL Design-Gap

Synthetic VHDL Microprocessor Core Design

Simulation and Design of Embedded CPU

Remote Embedded Simulation System For Sw/Hw Co-Design Based On Dynamic Partial Reconfiguration

Algorithms and Methodology in Physical Domain Optimization for High-Performance Vlsi Design

Vlsi Implementation of A High-Performance 32-Bit Risc Microprocessor

An innovative embedded logic analyzer based SoC verification platform

Design of multi-FPGA-based multi-core processor NoC verification platform