Abstract:Two semi-alicyclic thermoplastic polyimides (PI) have been prepared from stereoisomeric hydrogenated pyromellitic dianhydrides, including 1S,2R,4S,5R-hydrogenated pyromellitic dianhydride (ccHPMDA or H-PMDA) and 1R,2S,4S,5R-hydrogenated pyromellitic dianhydride (ctHPMDA or Hʹʹ-PMDA) and a fluorine-containing diamine, 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane (BDAF), respectively. The derived PI-1 (ccHPMDA-BDAF) and PI-2 (ctHPMDA-BDAF) resins were easily soluble in polar aprotic solvents, such as N -methyl-2-pyrrolidinone (NMP) and N,N -dimethylacetamide (DMAc) and meanwhile they also exhibited good thermoplasticities. Thus, the PI films (thickness: ~25 μm) and sheets (thickness: ~3 mm) were separately prepared from the PI solutions in DMAc and the PI powders, respectively. The stereoisomeric effects in the ccHPMDA-derived PI-1 and the ctHPMDA-derived PI-2 apparently affected the melt-flowability of the polymers. PI-2 exhibited lower melting viscosities than that of the PI-1 counterpart. The PI sheets exhibited obviously reduced optical transparency compared with those of the PI films; however better optical transparency than those of the common thermoplastic PI sheets. For example, PI-2 sheet showed the optical transmittance value at the wavelength of 760 nm (T 760 ) of 69.6%, which was 19.5% lower than that of the analogous PI-2 film (T 760 = 89.1%), however 50.3% and 65.7% higher than those of the commercially available PI-ref1 sheet (T 760 = 19.3%) derived from 3,3ʹ,4,4ʹ-oxydiphthalic dianhydride (ODPA) and 4,4ʹ-oxydianiline (ODA) and the PI-ref2 sheet (T 760 = 3.9%, Aurum ® PL450C, Mitsui Chem. Co, Ltd., Japan), respectively. Meanwhile, the PI-1 and PI-2 sheets showed the heat deflection temperatures (HDT) of 261.0 °C and 265.0 °C, respectively, which were obviously higher than those of the referenced PIs. At last, the PI sheets exhibited good mechanical properties, including high flexural strength (130.0 ~ 132.0 MPa), flexural modulus (2.87 ~ 2.96 GPa), compression strength (124.4 ~ 149.3 MPa), compression modulus (1.49 ~ 1.59 GPa), and impact strength (129.0 ~ 139.6 KJ/m 2 ).

Preparation and Properties of Novel Triphenylpyridine‐Containing Hyperbranched Polyimides Derived from 2,4,6‐tris(4‐aminophenyl)pyridine under Microwave Irradiation

Novel Thermally Stable and Organosoluble Aromatic Polyamides with Main Chain Phenyl-1,3,5-Triazine Moieties

Study on Syntheses and Properties of Some Novel Polyimides Containing Bisthiazole Rings

A Novel Hyperbranched Copolymer Constituted of Triphenylamine and Divinyl Bipyridyl Units

Synthesis, characterisation and thermal properties of hyperbranched polyimide derived from melamine via emulsion polymerisation

High thermally stable thermosetting polyimides derived from a carborane-containing tetramine

Synthesis and Characterization of Novel Fluorinated Polyimides Derived from 4-Phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethyl-phenoxy)phenyl]pyridine and Dianhydrides

Synthesis and Properties of Some New Polyimides Containing Bithiazole Rings

Preparation and Characterization of Hyperbranched Polyaspartimides from Bismaleimides and Triamines

Synthesis and properties of novel polyimides based on 10,10-bis[4-(4-aminophenoxy)phenyl]-9(10H)-anthrone

Structure and Properties of Thermoplastic Polyimide Based on 4', 4'-(Oxybis (methylene)) Bis ([1.1'- Bipheny]3-Amine) Diamine

Synthesis and properties of polyimides from a diamine containing side diphenylphosphine oxide and trifluoromethyl groups

Synthesis and Characterization of Biphenyl Polyimide Containing Alkyl Sulfide Structure

Preparation of polyamides containing tetraphenyl-imidazolyl units from 1,2-bis(4-iodophenyl)-4,5-diphenyl-1H-imidazole via C–N coupling reaction and their characterization

Synthesis and Properties of a High‐molecular‐weight Poly(amic Acid) and Polyimide Based on 2,2‐Bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane

Preparation and characterization of aromatic polyimides derived from 4,4′-oxydiphthalic anhydride and 4,4′-diaminodiphenylmethane with different alkyl substituents

Preparation and characterization of soluble heat-resistant polyimide films containing bis-N-phenyl-benzimidazole

Synthesis and characterization of bisphthalonitrile-terminated polyimide precursors with unique advantages in processing and adhesive properties

Synthesis and properties of novel colorless and thermostable polyimides containing cross‐linkable bulky tetrafluorostyrol pendant group and organosoluble triphenylmethane backbone structure

Soluble and Cross-Linkable Polyimides from a Vanillin-Derived Diamine: Preparation, Post-Polymerization and Properties

Preparation and properties of semi-alicyclic thermoplastic polyimide sheets from stereoisomeric hydrogenated pyromellitic dianhydrides and fluorinated diamine