Abstract:Rotor–stator mechanisms, which are the key components in flotation cells, serve to mix the slurry and the air bubbles. The optimization of rotor–stator mechanisms improves the metallurgical performance and decreases the energy consumption of a flotation cell. The angle of the impeller blades, which is an important aspect of the design of rotor–stator mechanisms, significantly impacts the pumping and power consumption of a flotation cell. The flow pattern of a flotation cell with different impellers was investigated by combining PIV measurements and CFD simulation. PIV and CFD also revealed the flow field characteristics of the test cross-section under the impeller. The PIV measurement results agree with the CFD prediction results, and the backward impeller, radial impeller and forward impeller all produce similar flow patterns with upper and lower circulations. The velocity-area method, which integrates the axial velocity in the area of the selected section using CFD simulation, can be used to calculate the impeller circulation volume. The circulation volumes of the backward impeller and radial impeller are almost identical and are approximately 7% larger than that of the forward impeller. Thus, the backward impeller and radial impeller are better choices when large-volume circulation is needed. Based on the CFD simulation, the power consumption of the backward impeller is 13% less than that of the radial impeller and 19% less than that of the forward impeller. The backward impeller was shown to save more energy than the other two impellers, and it can decrease the operation cost for concentrators. This study aids the structural design of impellers for KYF flotation cells.

Mixing performance comparison between top entry impeller and side entry impeller in stirred tanks

Computational Fluid Dynamics Simulation of Hydrodynamics in an Uncovered Unbaffled Tank Agitated by Pitched Blade Turbines

Computational Fluid Dynamics Simulation of Bubble Size and Local Gas Holdup in Stirred Vessel

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Experimental Study of Influence of the Impeller Spacing on Flow Behaviour of Double‐Impeller Stirred Tank

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Experimental and Numerical Studies of the Flow Field in a Stirred Tank Equipped with Multiple Side‐Entering Agitators

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

Experimental and Computational Analysis of the Impeller Angle in a Flotation Cell by PIV and CFD

Numerical simulation of mixing process in a stirred tank agitated by side-entering agitators

Micromixing Simulation of Novel Large-Double-Blade Impeller

Investigation of the flow patterns and mixing efficiency in a stirred tank through particle image velocimetry

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System

Numerical optimization for blades of Intermig impeller in solid–liquid stirred tank

The Influence of Impeller Combination on the Gas-Liquid Dispersion Performance of a Coaxial Mixer in Viscous Fluids

Experimental Study on the Mixing and Dispersing of Floating Particles in Viscous System

Progress of the Experimental Researches and Numerical Simulations of the Flow Fields in Stirred Tanks

CFD simulation and experimental analysis of solid-liquid mixing characteristics in a stirred tank with a self-similarity impeller

Numerical Simulation of Dense Solid-Liquid Mixing in Stirred Vessel with Improved Dual Axial Impeller

Mixing performance of a non-Newtonian fluid in a coaxial agitated impeller reactor

PIV Measurement and CFD Simulation of Liquid-Liquid Mixing in Mixer Settler with Rigid-Flexible Impeller