Abstract:Graphene encapsulated liquid metal particles is a novel and promising class of biphasic composite, with application in the next generation of electronic devices. Here, rapid, low‐cost, and scalable fabrication of solution processed large area rGO@EGaIn electrodes is demonstrated. rGO@EGaIn solution is first deposited over the substrate through spray coating, and then processed through a low‐cost laser (master oscillator power amplifier (MOPA)). This allows simultaneous reduction, thinning, ablation, and high resolution patterning of the deposited films. Surprisingly, it is found that by adjusting the laser parameters, it is possible to make semitransparent conductors via laser thinning of the films. Scanning electronic microscopy (SEM) and energy dispersive X‐ray spectroscopy (EDS) spectroscopy confirm that although the rGO/EGaIn weight ratio is only ≈0.08, the composite has a considerably different microstructure compared to the eutectic gallium–indium alloy (EGaIn) particles alone. Graphene oxide (GO) protects the EGaIn from extreme morphology change under laser irradiation. Therefore, various “shades” of rGO@EGaIn can be fabricated in a single film. This allows development of large electrodes with complex geometries in a few seconds. The conductivity, transparency, and reduction of the laser processed films are characterized by several techniques and an example of application is demonstrated by laser patterning a highly sensitive breath‐monitoring sensor. In this article, for the first time, the laser irradiation of spray coated liquid metal particles encapsulated with graphene oxide (GO) is reported. The laser reduction process of GO is demonstrated to fabricate opaque and semitransparent electrodes on a glass substrate. Finally, an application of high‐resolution laser patterns is developed for human breath sensing.

Direct Fabrication of Photoconductive Patterns on Lbl Assembled Graphene Oxide/Pdda/Titania Hybrid Films by Photothermal and Photocatalytic Reduction

P‐130: Highly Conductive Graphene and PEDOT: PSS Hybrid Film with the Treatment by Hydroiodic Acid for Indium Tin Oxide‐Free Flexible Organic Light Emitting Diodes

Laser Writing of Eutectic Gallium–Indium Alloy Graphene‐Oxide Electrodes and Semitransparent Conductors

Highly conductive PEDOT:PSS and graphene oxide hybrid film from a dipping treatment with hydroiodic acid for organic light emitting diodes

High-power Laser-Patterning Graphene Oxide: A New Approach to Making Arbitrarily-Shaped Self-Aligned Electrodes

Photo-assisted preparation and patterning of large-area reduced graphene oxide–TiO2 conductive thin film

Templated Patterning of Graphene Oxide Using Self-Assembled Monolayers

Direct Writing of Graphene Patterns on Insulating Substrates under Ambient Conditions.

Moderately Reduced Graphene Oxide/pedot:Pss As Hole Transport Layer to Fabricate Efficient Perovskite Hybrid Solar Cells

Micro-contact printing of graphene oxide nanosheets for fabricating patterned polymer brushes.

Enhanced Photocurrent Generation In Graph1ene/Copper Phthalocyanine/Mg-Al-Layered Double Hydroxide Layer-By-Layer Multilayers

P-93: Highly Conductive and Uniform Graphene hybrid Electrode with Chemical Reduction for Flexible Organic Light-Emitting Diodes

Excellent optoelectrical properties of graphene oxide thin films deposited on a flexible substrate by Langmuir–Blodgett assembly

Integrating Porphyrin Nanoparticles into a 2D Graphene Matrix for Free-Standing Nanohybrid Films with Enhanced Visible-Light Photocatalytic Activity.

Photocatalytic Patterning and Modification of Graphene

Fabrication of micro-structures on a PVDF/TiO 2 nano-composite film using photocatalytic lithography

High-speed Femtosecond Laser Plasmonic Lithography and Reduction of Graphene Oxide for Anisotropic Photoresponse

Study on reduction of graphene oxide films using picosecond laser direct writing

One-Step In Situ Patternable Reduction of a Ag–rGO Hybrid Using Temporally Shaped Femtosecond Pulses

Controlled Assembly of Layer-by-layer Stacking Continuous Graphene Oxide Films and Their Application for Actively Modulated Field Electron Emission Cathodes.

Highly Conductive Free-Standing Reduced Graphene Oxide Thin Films for Fast Photoelectric Devices