Numerical Investigation on the Dryout Point of Annular Flow in the Upward Narrow Annuli with Bilateral Heating
Su Guanghui,Duan Feng,Qiu Suizheng,Xiao Zejun,Huang Yanping
DOI: https://doi.org/10.1007/s11708-007-0037-3
2007-01-01
Frontiers of Energy and Power Engineering in China
Abstract:Based on the fundamental conservation principles —the mass, momentum, and energy conservation equations of liquid films and the momentum conservation equation of vapor core, a theoretical three-fluid model has been developed to predict the dryout point of upward annular flow in vertical narrow annuli with bilateral heating. The range of the parameters are: pressure from 0.5 to 5.0 MPa; mass flow rate from 30 to 150 kg/(m2·s); gap size from 1.2 to 2.0 mm. Through numerically solving the model, the relationships among the parameters of the critical quality (X C), critical heat flux (Q CHF), mass flow rate, system pressure, and the ratio of heat flux on the inner wall of the outer tube to that on the outer wall of the inner tube (q o/q i) are obtained and analyzed. The predicted results accurately match with the experimental data. For a fixed q o, X C will increase with the decreases in the gap size and the tube curvature when the dryout point occurs on the outer wall of the inner tube. However, for a fixed q i, when the dryout point occurs on the inner wall of the outer tube, the parametric trend is reverse. When the dryout point on the inner and outer walls occur simultaneously, X C reaches a peak value, and the ratio of q o/q i at this position changes with the gap size and the tube curvature.