Abstract:Forming of near-net-shaped and load-adapted functional components, as it is developed in the T ransregional C ollaborative Research Centre on Sheet-Bulk Metal Forming SFB/TR 73 , causes different problems, which lead to non-optimal manufacturing results. For these high complex processes the prediction of forming effects can only be realized by simulations. A stamping process of pressing eight punches into a circular blank is chosen for the considered investigations. This reference process is designed to reflect the main aspects, which strongly affect the final outcome of forming processes. These are the orthotropic material behaviour, the optimal design of the initial blank and the influences of different contact and friction laws. The aim of this work is to verify the results of finite element computations for the proposed forming process by experiments. Evaluation methods are presented to detect the influence of the anisotropy and also to quantify the optimal blank design, which is determined by inverse form finding. The manufacturing accuracy of the die plate and the corresponding roughness data of the milled surface are analysed, whereas metrological investigations are required. This is accomplished by the help of advanced measurement techniques like a multi-sensor fringe projection system and a white light interferometer. Regarding the geometry of the punches, micromilling of the die plate is also a real challenge, especially due to the hardness of the high-speed steel ASP 2023 (approx. 63 HRC). The surface roughness of the workpiece before and after the forming process is evaluated to gain auxiliary data for enhancing the friction modelling and to characterise the contact behaviour.

Applications of Numerical Simulation to the Analysis of Bulk-Forming Processes - Case Studies

On the Size Effects in Micro/meso Semisolid Extrusion–forging of A356 Aluminum Alloy

Numerical Model Simulation of the Double-Roll Rotary Forging of Large Diameter Thin-Walled Disk

Experimental Verification of a Benchmark Forming Simulation

3D FE modeling simulation of the double-roll hot rotary forging of large diameter thin-walled metal disk

SIMULATION ANALYSIS OF WHEEL BEARING FORGING PROCESS BASED ON DEFORM

Numerical simulation of microstructure evolution of flange axle during hot forging

Forming characteristics and mechanism of double-roll rotary forging for large-diameter and thin-walled metal discs

Research on plastic deformation transfer and distribution of large-diameter thin-walled metal ring parts in double-roll pendulum hot rotary forging process

Numerical Simulation of Recrystallization and Grain Growth Evolutions During Metal Forming Processes

Numerical Simulation and Process Improvement of a Typical Car Thread Plate

Failure Prediction in Bulk Metal Forming Process

Numerical Simulation Analysis for Closed-die Forging Process of Hub Bearing Rings

Study on Deep drawing Forming Process of Wheel Disks

On the effect of deformation conditions on the metal flow behavior during upsetting process using finite element simulation DEFORM 3D software

FE Simulation of Extrusion to Produce a Thin-Walled Wide Profile Through a Spreading Pocket Die

Modeling and Numerical Simulation Research on Hollow Steel Ingot Forging Process of Heavy Cylinder Forging

Numerical Simulation of 6061 Aluminum Alloys during the Semi-Solid Backward Extrusion

FEM analysis of the extrusion-forging compound process for knuckle of Benz heavy truck

Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

A novel process for manufacturing large-diameter thin-walled metal ring: Double-roll pendulum hot rotary forging technology