Abstract:This paper presents a design study focusing on the thermal safety of an induction motor integrated with a pump unit, which operates submerged in liquefied natural gas (LNG) in the LNG tanks of LNG carrier ships ranging from 150 K to 200 K cubic meters (CBM). In this study, we carried out the electromagnetic design of the induction motor and verified the thermal safety against a temperature increase due to losses during the motor operation through thermal fluid analysis, taking into account the discharge flow of the emergency pump and the air gap of the motor. In the electromagnetic design, the resistivity of the stator winding copper conductors and the rotor aluminum bars, which act as important design constants for the rated operating and starting characteristics of the induction motor in cryogenic temperature environments, reflects the characteristic of linearly changing with the temperature. In cryogenic environments, the reduction in the resistance of the rotor bars of the induction motor leads to a decrease in the starting torque characteristics. Therefore, the shape optimization design of the rotor bar was performed to improve the starting torque characteristics, and 2D electromagnetic analysis was performed on the magnetic flux density distribution and magnetic saturation using Ansys Electromagnetics 16.0. After the electromagnetic design, a 3D thermal flow analysis was conducted using Ansys Fluent 17.0, considering the stator iron losses, rotor bar losses, stator and rotor iron losses, and stray load losses as heat sources. The flow analysis aimed to analytically verify the thermal safety concerning the vaporization of the LNG flowing through the emergency pump's discharge flow path and the motor's internal air gap. The motor was manufactured, and the rated and starting operating characteristics of the motor were measured under LN2 submerged conditions according to the IEEE 112 F1 method, to validate whether the performance characteristics met the specifications' requirements. Subsequently, the thermal safety of the motor was finally verified through a temperature increase test under LNG submerged conditions after assembling it with the emergency pump.

Structure and design analysis of submerged LNG cryopump

Key technologies and research schemes for submerged pumps for liquefied natural gas

Analysis of internal flow and energy loss in a LNG cryogenic submerged pump

Design and Analysis of the Multifunctional Oil-Injection Equipment for Deep-Sea Hydraulic Systems.

Influence of cavitation on inducer and return channels of LNG pump

STRUCTURE CHARACTERISTICS AND APPLICATION EDGES OF SUBMERSIBLE LNG PUMPS

Coupled Electromagnetic and Thermal Analysis of a 15kw Cryogenic Induction Motor for Submerged Liquefied Natural Gas Pumps

Design and Performance Analysis of High-Speed Cryogenic Permanent Magnet Synchronous Motor

Design of 200 kW Cryogenic Induction Motor for Liquefied Natural Gas Emergency Pump

Finite element analysis of strength of mobile cryogenic LNG storage tank

Design and hydraulic analysis of a multiphase pump

Main Losses Study of Cryogenic Induction Motor for Submerged Liquid Natural Gas Pump

Research on Cryogenic Cooling System of Electric Rocket Pump Driving System

A Hydrodynamical Study on Motions and Mooring Loads of the Small Scale LNG Carrier

Quantitative Analysis of Main Parameters on Cryogenic LNG Offloading from LNG-FPSO

Research on the Material Characteristics and Loss Calculation Method of Cryogenic Permanent Magnet Motor Stator for LNG Pump

Evaluating of the Effect of the Cavitation-Vortex Interaction on the Energy Conversion in a Two-Stage LNG Cryogenic Submerged Pump

Numerical and experimental analysis of the cavitation and flow characteristics in liquid nitrogen submersible pump

Numerical Analysis and Structure Optimization of Submersible Tubular Pump’s Hydraulic Performance

Research on loss differences and thermal optimisation of submerged cryogenic high‐speed permanent magnet motors

Performance Simulation on a New Type of Liquid Pump