Abstract:The Ce x Ti 1− x O 2 mixed oxides at different mole ratios ( x =0.1–1.0) were prepared by co-precipitation of TiCl 4 and Ce(NO 3 ) 3 . The structural and reductive properties of the Ce x Ti 1− x O 2 were affected by calcination temperature. At x =0.1–0.3, CeTi 2 O 6 phase was formed and mainly as amorphous after calcination at 650°C. At x =0.3, only CeTi 2 O 6 was formed after calcination at 750°C and CeTi 2 O 6 crystallized completely after calcination at 800°C. TPR analyses showed that the amount of H 2 consumption by Ce x Ti 1−x O 2 (650°C) (except x =0.1) was greater than that by single CeO 2 , and the valence of CeO 2 was the lowest (+3.18) at x =0.3. CuO/Ce 0.3 Ti 0.7 O 2 was prepared by the impregnation method and catalytic properties were examined by means of a GC micro-reactor NO+CO reaction system, BET, TPR, XRD, XPS and NO-TPD. It was found that CuO/Ce 0.3 Ti 0.7 O 2 calcined at 650°C had the highest activity in NO+CO reaction with 100% NO conversion at reaction temperature of 300°C, and at 650°C Ce 0.3 Ti 0.7 O 2 just began to crystallize. The catalytic activities were largely affected by the pre-treatment conditions. At low reduction temperature (100°C), CuO species was difficult to reduce. When high degree of reductions took place, both CuO species and Ce 0.3 Ti 0.7 O 2 reduced and thus a part of CuO species on the support surface would be covered. The XPS and NO-TPD analyses showed that CuO/Ce 0.3 Ti 0.7 O 2 had four NO absorption centers (Cu + , Cu 2+ (I), Cu 2+ (II) and Ce 3+ ). The CuO species involving in NO+CO reaction included Cu 2+ (I) and Cu + , and CeO 2 species (Ce 3+ and Ce 4+ ).

Effect of addition of promoter CeO2 in Pt/SiC catalyst on CO oxidation

Propene and CO Oxidation on Pt/Ce-Zr-SO 4 2– Diesel Oxidation Catalysts: Effect of Sulfate on Activity and Stability

Effect of active oxygen on the performance of Pt/CeO2 catalysts for CO oxidation

Propene and CO oxidation on Pt/Ce-Zr-SO42-diesel oxidation catalysts:Effect of sulfate on activity and stability

Promote the Efficient Co-Combustion of Toluene & CO in Pt/CeO2 Catalyst: Orientally Adjusting the Oxidized SMSI to Optimize Acid Site and Oxygen Vacancy

Support Interaction of Pt/CeO2 and Pt/SiC Catalysts Prepared by Nano Platinum Colloid Deposition for CO Oxidation

Effect of CeO2 on oxidation of CO over Pd/Al2O3 catalyst

Study of Ce 0.7 Sn 0.3 O 2 supported PdO catalysts for CO oxidation

Efficient CO Oxidation using Co3O4−CeO2 Nanoparticles Supported on Resin–Based Spherical Activated Carbon with Controllable Oxygen Species

Promoting Effects of Pretreatment on Pd/CeO2 Catalysts for CO Oxidation

Studies on the Preparation of Co3O4/CeO2 Materials and Their Applications on CO Oxidation at Low-Temperature

Characterization study of CeO2 supported Pd catalyst for low-temperature carbon monoxide oxidation

Study of Ce<sub>0.7</sub>Sn<sub>0.3</sub>O<sub>2</sub> supported PdO catalysts for CO oxidation

Promotional role of ceria on cobaltosic oxide catalyst for low-temperature CO oxidation

In Situ FT-IR Study on CO Oxidation over Co3O4/CeO2 Catalyst

Modification of Pd–CeO2 Catalyst by Different Treatments: Effect on the Structure and CO Oxidation Activity

Porous stainless-steel fibers supported CuCeFeOx/Zeolite catalysts for the enhanced CO oxidation: Experimental and kinetic studies

Preparation and Characterization of Ce 0.3 Ti 0.7 O 2 and Supported CuO Catalysts for NO+CO Reaction

Effect of loading method on catalytic performance of Pt/CeO2 system for CO oxidation

Promotional Effect of Pt-Doping on the Catalytic Performance of Pt−CeO2 Catalyst for CO Oxidation

The catalytic activity for CO oxidation of CuO supported on Ce0.8Zr0.2O2 prepared via citrate method