Abstract:The isotactic polypropylene (iPP) with different uniformities of stereo-defect distribution was synthesized, and the beta-nucleated iPP/glass fiber composites (TPPA-GF and TPPB-GF) were prepared. The influence of glass fiber on the non-isothermal crystallization kinetics, beta-phase crystallization, and morphology behavior of the composites were investigated by means of differential scanning calorimetry (DSC), scanning electronic microscopy (SEM), and wide angle X-ray diffraction (WAXD). The results revealed that for both TPPA-GF and TPPB-GF, as the amount of GF increases, the crystallization peak temperature and relative degree of crystallinity increase gradually, while crystallization peak width decreases gradually. Meanwhile, the half crystallization time t(1/2) of both TPPA and TPPB decreases gradually, indicating that the addition of GF can accelerate the crystallization of both TPP-A and TPP-B. Moreover, the addition of glass fiber decreases the energy barriers E and makes the composites to crystallize easier. The results of melting behavior study and WAXD indicate that high cooling rate leads to relatively low crystallization temperature and low thermal stability, resulting in higher beta-phase content with relatively low thermal stability, while low cooling rate leads to high crystallization temperature and high thermal stability, which is more favorable for the formation of less amount of beta-phase with high thermal stability. For both TPPA and TPPB, the higher the content of glass fiber, the lower the beta(c). The addition of glass fiber not only reduces the content of beta-phase but also destroys its spherulite morphology. It was also observed that the glass fiber is more uniformly dispersed in TPPB compared with TPPA.

Structure and properties of glass fiber reinforced polypropylene compounds with high fluidity

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Crystallization Behavior and Properties of Glass Fiber Reinforced Polypropylene Composites

Study on Melting Grafted Polypropylene with High Fluidity

Mechanical Properties and Morphology of Polypropylene/Polypropylene-g-Maleic Anhydride/Long Glass Fiber Composites

Investigation on the Crystallization Behavior and Morphology of Β-Nucleated Isotactic Polypropylene/glass Fiber Composites

Mechanical Properties of Glass Fiber and Liquid Crystalline Polymer Reinforced Polypropylene Hybrid Composites Toughened with Elastomers

Mechanical properties and morphological structures of short glass fiber reinforced PP/EPDM composite

Study on Preparation and Properties of Glass Fiber Reinforced Polylactide

Effects of glass fiber reinforcing and thermal post‐treatment on the mechanical properties and crystallization behaviors of polyoxymethylene

Morphology and Properties of Bio-Based Poly (lactic Acid)/high-Density Polyethylene Blends and Their Glass Fiber Reinforced Composites

COMPRESSION MOLDING OF POWDER IMPREGNATING LONG GLASS FIBER REINFORCED POLYPROPYLENE

Studies of polypropylene modified by waste of PMMA/ABS/UPR multilayer plates

Fibre Orientation and Mechanical Properties of Short Glass Fibre Reinforced Pp Composites

Study on Rheological Properties of PTT/Glass Fiber Composite

TENSILE PROPERTIES OF INJECTION MOLDED LONG GLASS FIBER REINFORCED POLYPROPYLENE PARTS

Recent Research Progress of Short Glass Fiber Reinforced Polypropylene

Effect of Glass Fibers with Different Surface Properties on the Morphology and Properties of Polyamide 6/poly(butylene Terephthalate) Blends

Mechanical behavior of carbon/glass polypropylene hybrid composites

Morphology and Properties of Short R-PET Fiber Reinforced PP Composites

Rheological and Mechanical Properties of Pc/Hdpe/Glass Fiber Composites