Abstract:Due to the influence of geometric factors, the temperature and humidity profile of lidar’s near-field signal was warped when sensing the air environment. In order to perform geometric factor correction on near-field signals, this article proposes different correction solutions for the Mie and Raman scattering channels. Here, the Mie scattering channel used the Raman method to invert the aerosol backscatter coefficient and correct the extinction coefficient in the transition zone. The geometric factor was the ratio of the measured signal to the forward-computed vibration Raman scattering signal. The aerosol optical characteristics were reversed using the corrected echo signal, and the US standard atmospheric model was added to the missing signal in the blind zone, reflecting the aerosol evolution process. The stability and dependability of the proposed algorithm were validated by the consistency between the visibility provided by the Environmental Protection Agency and the visibility acquired via lidar retrieval data. The near-field humidity data were supplemented by the interpolation method in the Raman scattering channel to reflect the water vapor transfer process in the temporal dimension. The measured transmittance curve of the filter, the theoretical normalized spectrum, and the sounding data were used to compute the delay geometric factor. The temperature was retrieved and the near-field signal distortion issue was resolved by applying the corrected quotient of the temperature channel. The proposed algorithm exhibited robustness and universality, enhancing the system’s detection accuracy compared to the temperature and humidity data constantly recorded by the probes in the meteorological gradient tower, which have a high correlation with the lidar observation data. The comparison between lidar data and instrument monitoring data showed that the proposed algorithm could effectively correct distorted echo signals in the transition zone, which was of great value for promoting the application of lidar in the meteorological monitoring of the urban canopy layer.

Geometrical form factor determination with Raman backscattering signals.

Generalized High-Spectral-resolution Lidar Technique with a Multimode Laser for Aerosol Remote Sensing.

Experimental Determination of Dual-Wavelength Mie Lidar Geometric Form Factor Combining Side-Scatter and Back-Scatter Signals

Geometrical Constraint Experimental Determination of Raman Lidar Overlap Profile.

Retrieval and Analysis of a Polarized High-Spectral-resolution Lidar for Profiling Aerosol Optical Properties

Experimental Determination of Lidar Geometric Factor in Differential Absorption Lidar

Analysis and determination of lidar geometrical factor

Lidar Ratio Regional Transfer Method for Extinction Coefficient Accuracy Improvement in Lidar Networks.

Retrieving the Seawater Volume Scattering Function at the 180° Scattering Angle with a High-Spectral-resolution Lidar

Geometric Factor Correction Algorithm Based on Temperature and Humidity Profile Lidar

Study for Measurement of Lidar Constant

A novel lidar system for profiling the aerosol hygroscopic growth factor

Retrieval of aerosol and cloud optical parameters based on Raman lidars

Feasibility Study of Water Vapor and Temperature Retrieval Using A Combined Vibrational Rotational Raman and Mie Scattering Multi-Wavelength Lidar

Raman-Mie Lidar Measurements of Aerosol Wavelength Exponent in the Troposphere

Retrieval of Aerosol Profiles by Raman Lidar with Dynamic Determination of the Lidar Equation Reference Height

Properties of Aerosol and Cloud from Raman-mie Lidar and Radar Soundings

New experimental method for lidar overlap factor using a CCD side-scatter technique.

A New Derivation Method for Aerosol Extinction Coefficient Detected by Raman Lidar

Capability Of Raman Lidar For Monitoring The Variation Of Atmospheric Co2 Profile

Aerosol and Cloud Optical Properties Measured by A Raman Lidar