Abstract:Due to the influence of geometric factors, the temperature and humidity profile of lidar’s near-field signal was warped when sensing the air environment. In order to perform geometric factor correction on near-field signals, this article proposes different correction solutions for the Mie and Raman scattering channels. Here, the Mie scattering channel used the Raman method to invert the aerosol backscatter coefficient and correct the extinction coefficient in the transition zone. The geometric factor was the ratio of the measured signal to the forward-computed vibration Raman scattering signal. The aerosol optical characteristics were reversed using the corrected echo signal, and the US standard atmospheric model was added to the missing signal in the blind zone, reflecting the aerosol evolution process. The stability and dependability of the proposed algorithm were validated by the consistency between the visibility provided by the Environmental Protection Agency and the visibility acquired via lidar retrieval data. The near-field humidity data were supplemented by the interpolation method in the Raman scattering channel to reflect the water vapor transfer process in the temporal dimension. The measured transmittance curve of the filter, the theoretical normalized spectrum, and the sounding data were used to compute the delay geometric factor. The temperature was retrieved and the near-field signal distortion issue was resolved by applying the corrected quotient of the temperature channel. The proposed algorithm exhibited robustness and universality, enhancing the system’s detection accuracy compared to the temperature and humidity data constantly recorded by the probes in the meteorological gradient tower, which have a high correlation with the lidar observation data. The comparison between lidar data and instrument monitoring data showed that the proposed algorithm could effectively correct distorted echo signals in the transition zone, which was of great value for promoting the application of lidar in the meteorological monitoring of the urban canopy layer.

Analysis and determination of lidar geometrical factor

Experimental Determination of Lidar Geometric Factor in Differential Absorption Lidar

Geometrical form factor determination with Raman backscattering signals.

Experimental Determination of Dual-Wavelength Mie Lidar Geometric Form Factor Combining Side-Scatter and Back-Scatter Signals

Retrieval and Analysis of a Polarized High-Spectral-resolution Lidar for Profiling Aerosol Optical Properties

Detection of Atmospheric Boundary Layer Height in the Plum Rain Season over Hangzhou Area with Three-Dimensional Scanning Polarized Lidar

Study for Measurement of Lidar Constant

Analysis of Scannerless Imaging Lidar in Large Field of View Condition

Method and Analysis of Calculating Signal-To-Noise Ratio in Lidar Sensing

Geometrical Constraint Experimental Determination of Raman Lidar Overlap Profile.

Charactering Lidar Optical Subsystem Using Four Quadrants Method

Generalized theoretical model for the imaging-based atmospheric lidar technique

New experimental method for lidar overlap factor using a CCD side-scatter technique.

Retrieving aerosol backscattering coefficient for short range lidar using parameter selection at reference point

Geometric Factor Correction Algorithm Based on Temperature and Humidity Profile Lidar

Modification of lidar equation in large field of view

Numerical Ray-Tracing Approach with Laser Intensity Distribution for Lidar Signal Power Function Computation

Theoretical Analysis on Range Accuracy of Gain-Modulated Scannerless Lidar

Calculating of the Lidar Overlap Function

Analysis of Scanning Characteristics of a Two-dimensional Scanning Lidar

Characteristic of Multiply Backscattered Signal of Meteorological Lidar