Abstract:To progress toward the high efficiency and low emission aviation engine technology, it is mandatory to understand the complex phenomena including kerosene spray atomization, evaporation, turbulent mixing and combustion in the engine combustor. Nowadays with the rapid growth of computational capacity over the world, large-eddy simulation (LES) performs a more and more important role in understanding the complex multi-phase combustion process of kerosene fuels in aviation engine configuration. In the present work, LES is employed to investigate a swirling kerosene spray jet flame in a model combustor, which has been studied experimentally. The turbulent combustion is modeled by the flamelet generated manifold (FGM) approach with a 3-component surrogate kerosene skeletal mechanism. The averaged gas velocity and temperature predicted by LES generally agrees well with the experimental measurements. Local extinction is observed at the inner shear layer of the swirling spray flame, due to droplet-turbulence-flame interactions. A parametric study with 11 cases is then performed to investigate the effects of inlet swirl/Reynolds number and fuel heating value on the kerosene flame. As the swirl number increases, the enhanced turbulent mixing between kerosene fuel and air facilitates the combustion process, but combustion instabilities may occur if the swirl number is too high. A higher Reynolds number can promote the turbulent combustion via a stronger recirculation zone, but it also has strong dilution effects on the combustion field. Variations in the fuel heating value directly impact the temperature field, but the flow field, major species concentrations and droplet phase statistics are only slightly affected. These LES results give clues to achieve optimal combustion performance in realistic aviation engine configurations via better arrangements of fuel and air injections.

Simulation Analysis of Combustion Process in Aerial Engine

Combustion Simulation with Particular Reference to Green Aviation

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Namerical Simulation on Factors Affecting Ignition Characteristics of A New Engine

Simulation of Combustion Process for Two Carbon Particles

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Numerical Investigation of Swirl-Stabilized Pulverized Coal Flames in Air and Oxy-Fuel Atmospheres by Means of Large Eddy Simulation Coupled with Tabulated Chemistry

Simulation of Turbulent Combustion in DLR Scramjet

Numerical simulation of charged characteristics of scramjet combustion products

Spray flames in an air-heptane swirling combustor

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

Analysis And Simulation Of Combustion Oscillations In A Laboratory Spray Combustor

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Numerical Simulation Method and Experimental Validation of a Single Char Particle Combustion Model in Bulk Space

CFD Simulation of Combustion in Gas Turbine Engine

Research on New Energy Technology in Energy-Saving and Emission-Reduction Low-Pollution Aerospace Engine

Large-eddy Simulation Investigation on the Effects of Inlet Swirl/reynolds Number and Fuel Heating Value on a Turbulent Kerosene Spray Flame

Experimental and simulation studies on flame characteristics and soot formation of C2H2 jet flames

DNS Analysis of a Three-Dimensional Supersonic Turbulent Lifted Jet Flame

Experiments and numerical simulation on soot formation in opposed-jet ethylene diffusion flames

Editorial Invited Topic--Fundamental Studies and Numerical Simulation of Turbulent Two-Phase Combustion