Abstract:Autofrettage processes are designed to strengthen hollow cylindrical and spherical parts and usually consist of one load-unload cycle. At the first stage, the workpiece is loaded to cause either partial or complete plastic deformations. During unloading, residual compressive stresses are formed in the vicinity of the inner surface of a part. The present work is devoted to a theoretical study of the process of rotational autofrettage of a hollow cylinder with fixed ends. The formulation of the problem is based on the theory of infinitesimal elastoplastic deformations, the Tresca plasticity condition and the flow rule associated with it. It is assumed that at the loading stage the cylinder material follows the linear-exponential law of isotropic hardening, and when unloaded it behaves as purely elastic body. The effect of a decrease in Young's modulus during unloading as a result of preliminary plastic deformation and its influence on residual stresses caused by rotational autofrettage of the cylinder are studied. To quantitatively describe the variation in Young's modulus, an exponential model with saturation is used. For the load stage, an exact analytical solution is obtained based on the Lambert W-function. Calculation of residual stresses in the cylinder is performed using the Runge-Kutta method. As an example, materials with significant decrease in Young's modulus are considered, namely aluminum alloy AA6022, steel DP980 and manganese steel. It has been established that taking into account the variable Young's modulus can lead to a significant reduction in the calculated level of residual stresses. This effect is especially important for the calculation of thick-walled cylinders and fairly high autofrettage velocities.

Autofrettage of A Spherical Pressure Vessel

Optimal Winding Conditions of Flat Steel Ribbon Wound Pressure Vessels with Controllable Stresses

Residual Stress in an Autofrettaged Tube Taking Bauschinger Effect As a Function of the Prior Plastic Strain

A General Autofrettage Model of a Thick-Walled Cylinder Based on Tensile-Compressive Stress-Strain Curve of a Material

Residual Stress Analysis of Re-autofrettage of a Swage-Autofrettaged Tube by Computer Modeling Incorporating Accurate Material Representation

A New Autofrettage Model of Thick-Walled Cylinder Considering the Strain-Hardening and Bauschinger Effect of Material

Analysis of residual stress field in strain-hardened hollow circular discs subjected to autofrettage by radial temperature difference

Fatigue Evaluation of Autofrettaged Thick-Walled Cylinders with a Radial Cross-Bore

Autofrettage and Shakedown Analyses of an Internally Pressurized Thick-Walled Spherical Shell Based on Two Strain Gradient Plasticity Solutions

Analysis of thick-walled spherical shells subjected to external pressure: Elastoplastic and residual stress analysis

Autofrettage and shakedown of thick cylinders under thermal and mechanical loads

Investigation on Autofrettage and Safety of the Thick-walled Cylinder under Thermo-mechanical Loadings

INFLUENCE OF VARIABLE YOUNG’S MODULUS ON RESIDUAL STRESSES INDUCED BY ROTATIONAL AUTOFRETTAGE OF A TUBE WITH FIXED ENDS

Autofrettage Effects on Strength and Deformation of Fiber Reinforced Pressure Vessel

Residual stresses in autofrettaged functionally graded pressurized thick cylinders

Effect of Bauschinger Effect and Yield Criterion on Residual Stress Distribution of Autofrettaged Tube

Determination of Residual Stress Distribution in Autofrettaged Tube Based on Modified Yielding Criterion and Tensile-Compressive Curve of Material

Autofrettage and shakedown analysis of strain-hardening cylinders under thermo-mechanical loadings

Strength optimization design of spherical hulls for deep-sea submersibles: A hydraulic autofrettage approach in external pressure vessels

Enhancing Fatigue Life of Thick-Walled Cylinders through a Hybrid Rotational-Swage Autofrettage-Induced Residual Stresses

A Three-Dimensional Analytical Solution for Sandwich Pipe Systems under Linearly Varying External Pressures