Abstract:<p>The acoustic emission (AE) location technique is used to characterize the entire progressive failure process of rock with preexisting cracks. The mechanical properties, AE characteristics, crack dynamic propagation process, failure modes and damage-fracture evolution rules are studied for prefabricated rock samples with different crack inclination angles under uniaxial compression. The results show that the peak strength and elastic modulus first decrease and then increase with increasing crack angle. AE events exhibit different characteristics with changes in stress. In the initial compaction and elastic deformation stage, the AE activity is not obvious; when microcracks form in the rock sample, the AE count increases; after entering the crack stable growth stage, the AE activity becomes significant; during the period of unstable crack propagation to rock failure, the AE activity is extremely active. The AE location can well accurately reflect the crack initiation position, propagation direction and surface orientation in the rock. AE location can well reflect cracks initiation position, propagation direction and space surface shape in the rock. For intact samples, microcracks are first generated at the ends of the sample and extend internally along the loading direction until they coalesce and form macroscopic cracks; for precracked samples, microcracks appear first at the tips of the prefabricated crack, and extend outward at a certain angle, while the microcracks are mainly concentrated around the preexisting crack, with a small number of microcracks distributed at both ends of the sample. With increasing the crack angle, the rock failure mode changes from splitting failure to tension-shear mixed failure and finally to single shear failure. The AE positioning results are in good agreement with the observed macroscopic failure of the rock samples. The damage variable based on AE counts divides the rock damage-fracture evolution process into four stages, and the initial damage and damage rate of the rock sample with a crack angle of 45° are the largest.</p>

STUDY ON THE AE ACTIVITY DURING THE FAILURE PROCESS OF GRANITE SAMPLES

Failure behaviors of fractured granite during loading and unloading under high confining pressure based on acoustic emission multi-parameter analysis

Experimental Study on Acoustic Emission Characteristics of Granite and Sandstone under Uniaxial Compression

Study on the Acoustic Emission and Thermal Infrared Signal Characteristics of Granite with Freeze-Thaw Damage in Cycle Loading Process

Identification of Crack Development in Granite under Triaxial Compression Based on the Acoustic Emission Signal

Experimental Study on Cracking Process and Fracture Properties of Granite under Mode I Loading by Acoustic Emission and Digital Image Correlation

Experimental Investigation into Grain Size Effect on Failure Behavior and Nonlinear Time-Varying Acoustic Emission Series of Granite

Combined acoustic methods in monitoring the crack development in granite

Quantifying the Progressive Fracture Damage of Granite Rocks by Stress–Strain, Acoustic Emission, and Active Ultrasonic Methods

Shear fracture behaviors and acoustic emission characteristics of granite with discontinuous joints under combinations of normal static loads and dynamic disturbances

DEFORMATION AND FAILURE CHARACTERISTICS OF GRANITE UNDER UNIAXIAL COMPRESSION AFTER HIGH TEMPERATURE

Experimental study on damage characteristics of Beishan granite under single loading and multiple loading with AE techniques

Mechanical Behavior and Acoustic Emission Characteristics of Intact Granite Undergoing Direct Shear

Experimental investigation on synergetic prediction of granite rockburst using rock failure time and acoustic emission energy

Characteristic stress variation and microcrack evolution of granite subjected to uniaxial compression using acoustic emission methods

Study on crack dynamic evolution and damage-fracture mechanism of rock with pre-existing cracks based on acoustic emission location

Failure Behaviors of Granitic Rocks Induced by Point/local Loads under Biaxial Compression Stress State

Failure study of weathered granite based on critical slowing down theory and acoustic emission b-value

Rock Stability Assessment Based on the Chronological Order of the Characteristic Acoustic Emission Phenomena

Effects of freeze-thaw cycles on granite failure using acoustic emission test

Passive Tomography to Image Stress Redistribution Prior to Failure on Granite