Abstract:A surface-modified D-type photonic crystal fiber (PCF) based on surface plasmon resonance (SPR) is reported for application as a polarization filter and refractive index sensor. The gold film is deposited on the surface of the designed fiber structure to stimulate the SPR effect. Through etching, the upper surface of the designed structure forms an angle of 170°. The etching angle changes the distance between the fiber core and the surface of gold film to enhance the local field SPR effect. The designed optical device is numerically simulated using the finite element method (FEM), the mode distribution is studied, and the coupling phenomenon is analyzed. At a wavelength of 1.31 μm, the y-polarization loss is 1307.90 dB/cm, while the loss of x-polarization is 1.13 dB/cm; at 1.55 μm, the y-polarization loss is 1755.19 dB/cm, while the x-polarization loss is only 1.24 dB/cm. In the case of the same structure parameters as the proposed polarization filter, of which communication window is 1.55 μm, the designed structure also serves as a refractive index sensor from 1.330 to 1.365. The average sensitivity of the refractive index sensor is up to 4857 nm/RIU, and the highest sensitivity is 7588 nm/RIU when the refractive index is 1.365. The results show that the reported SPR-based PCF simultaneously implements dual communication window polarization filtering and refractive index sensing. Hence, the designed device has promising applications with good filtering and sensing performance.

Single-polarization Photonic Crystal Fibers with a Multiplex Structure

A Single-Mode Polarization Maintaining Hollow Core Photonic Bandgap Fiber

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Numerical analysis of photonic crystal fiber of ultra-high birefringence and high nonlinearity

Research on Novel Single-Mode Polarization Maintaining Photonic Crystal Fiber

Proposed Square Lattice Photonic Crystal Fiber for Extremely High Nonlinearity, Birefringence and Ultra-High Negative Dispersion Compensation

Simultaneously Achieving a Large Negative Dispersion and a High Birefringence Over Er and Tm Dual Gain Bands in a Square Lattice Photonic Crystal Fiber

Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

A Novel Polarization Splitter Based on the Photonic Crystal Fiber with Nonidentical Dual Cores

Advances in Silica-Based Large Mode Area and Polarization-Maintaining Photonic Crystal Fiber Research

Modified D-type surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) for application as a polarization filter and refractive index sensor

New Nonlinear and Dispersion Flattened Photonic Crystal Fiber with Low Confinement Loss

Polarization-dependent Coupling in Twin-Core Photonic Crystal Fibers

Design and FEM analysis of pentagonal photonic crystal fiber for highly non-linear applications

Highly Birefringent Photonic Crystal Fibers with Near-zero Flattened Dispersion for Polarization-Maintaining Terahertz Transmission

Photonic Crystal Fibers with Squeezed Hexagonal Lattice.

PCF-based Polarization Splitters with Simplified Structures

Ultrahigh Birefringent Photonic Crystal Fiber with Ultralow Confinement Loss

High Birefringence and Low Loss Circular Air-Holes Photonic Crystal Fiber Using Complex Unit Cells in Cladding

A Novel Photonic Crystal Fiber with High Nonlinearity and Flattened Dispersion

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes