Abstract:This study aims at introducing the back stress of anisotropic strain-hardening into the crystal plasticity theory and demonstrating the rationality of this crystal plasticity model to describe the evolution of the subsequent yield surface of polycrystalline aluminum at the mesoscopic scale under complex pre-cyclic loading paths. By using two different scale finite element models, namely a global finite element model (GFEM) as the same size of the thin-walled tube specimen used in the experiments and a 3D cubic polycrystalline aggregate representative volume element (RVE) model, the evolution of the subsequent yield surface for different unloading cases after 30 pre-cycles is further performed by experiments and numerical simulations within a crystal plasticity finite element (CPFE) frame. Results show that the size and shape of the subsequent yield surfaces are extremely sensitive to the chosen offset strain and the pre-cyclic loading direction, which present pronounced anisotropic hardening through a translation and a distortion of the yield surface characterized by the obvious "sharp corner" in the pre-deformation direction and "flat" in the reverse direction by the definition of small offset strain, while the subsequent yield surface exhibits isotropic hardening reflected by the von Mises circle to be distorted into an ellipse by the definition of large offset strain. In addition, the heterogeneous properties of equivalent plastic strain increment are further discussed under different offset strain conditions. Modeling results from this study show that the heterogeneity of plastic deformation decreases as a law of fraction exponential function with the increasing offset strain. The above analysis indicates that anisotropic hardening of the yield surface is correlated with heterogeneous deformation caused by crystal microstructure and crystal slip. The crystal plasticity model based on the above microscopic mechanism can accurately capture the directional hardening features of the yield surface.

On the Accuracy of Self-Consistent Elasticity Formulations for Directionally Solidified Polycrystal Aggregates

Modeling of Deformation of Fcc Polycrystalline Aggregates Using A Dislocation-Based Crystal Plasticity Model

COUPLED CRYSTAL PLASTICITY-PHASE FIELD FORMULATION TO DESCRIBE THE MICROSTRUCTURAL EVOLUTION IN POLYCRYSTALLINE AGGREGATES DURING RECRYSTALISATION

Discrete Dislocation Density Modelling of Single Phase FCC Polycrystal Aggregates

Intergranular normal stress distributions in untextured polycrystalline aggregates

Loading Direction-Dependent Mechanical Properties of Columnar Polycrystal: A Molecular Dynamics Study

A Combined Electron Backscattered Diffraction and Visco-Plastic Self-Consistent Analysis on the Anisotropic Deformation Behavior in A Mg-Gd-Y Alloy

Influences of granular constraints and surface effects on the heterogeneity of elastic, superelastic, and plastic responses of polycrystalline shape memory alloys

A 3D Polycrystalline Plasticity Model for Isotropic Linear Evolution of Intragranular Misorientation with Mesoscopic Plastic Strain in Stretched or Cyclically Deformed Metals

In situ measurement of three-dimensional intergranular stress localizations and grain yielding under elastoplastic axial-torsional loading

A finite strain micromechanical-based constitutive model: Application to porous polycrystal

Study of Slip Activity in a Mg-Y Alloy by in Situ High Energy X-ray Diffraction Microscopy and Elastic Viscoplastic Self-Consistent Modeling

A Study of Microstructural Length Scale Effects on the Behaviour of FCC Polycrystals Using Strain Gradient Concepts

A Large Deformation Atomistic Study Examining Crystal Orientation Effects on the Stress–strain Relationship

Role of anisotropic strength and stiffness in governing the initiation and propagation of yielding in polycrystalline solids

Accurate Determination of Active Slip Systems Using a Novel Lattice Rotation Analysis: Quasi-in-situ EBSD/ECCI Study on the Homogeneous/heterogeneous Deformation of Polycrystalline Zirconium

Investigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation

Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling

Length scale effects on the macroscopic behaviour of single and polycrystalline FCC crystals

Crystal Plasticity Modeling and Neutron Diffraction Measurements of a Magnesium AZ31B Plate: Effects of Plastic Anisotropy and Surrounding Grains

Elastic Property Estimation in Polycrystalline Films with Crystallographic Texture and Grain Shape