Abstract:Atomization of low-temperature fuel is encountered in extreme operating conditions of liquid propulsion systems such as cold start and high-altitude relight for aeroengines. Fuel temperature has a great impact on airblast spray characteristics by influencing fuel viscosity and thus the gas–liquid interaction, which raises the demand to clarify the temperature-dependent transition in near-nozzle breakup behavior and the corresponding droplet size distribution. A liquid-centered swirl coaxial injector is tested on the low-temperature swirl spray and combustion test rig at Zhejiang University, using 25 kHz high-speed digital off-axis holography. RP-3 aviation kerosene is atomized under ignition conditions at temperatures of 233, 253, and 301 K, fuel pressures of 0.03 and 0.69 MPa, and air pressure ranging from 0 to 4.0 kPa. Time-resolved near-nozzle dynamics suggest four types of elementary breakup processes: wavy-sheet breakup, pulsating breakup, membrane-type breakup, and nonaxisymmetric Rayleigh breakup. Each process alternately dominates the near field as fuel Reynolds number (Ref) and aerodynamic Weber number (Weg) decrease, corresponding to four primary breakup modes. A mode classification plot is summarized. Spray structures show an extended breakup length and reduced spray cone angle as fuel temperature (Tf) decreases. Increasing air pressure (Pg) promotes spray expansion at 0.03 MPa, but contracts spray cone at 0.69 MPa. Cross-sectional Sauter mean diameter (SMD) distribution indicates a solid-cone spray at 0.03 MPa and a hollow cone spray at 0.69 MPa. Lowering Tf will rise the SMD in the spray center at 0.03 MPa and transform the toroidal SMD distribution at 0.69 MPa into a solid one. Finally, a temperature-related SMD model is derived considering the exponential viscosity–temperature relationship, and a good fit with R2 > 0.95 is achieved. This research aims to deepen the understanding of the effects of low temperature on the transition of near-nozzle atomization characteristics for airblast sprays. Both spray visualization and SMD results provide reference for numerical simulations and near-nozzle spray modeling.

Effects of Injection Temperature on the Jet Evolution under Supercritical Conditions

Large eddy simulation of fluid injection under transcritical and supercritical conditions

A Numerical Study of Fluid Injection and Mixing under Near-Critical Conditions

Numerical simulation of trans-/near-/supercritical injection characteristics based on real fluid properties

Experimental characterization and analysis of supercritical jet dynamics by phase-shifting interferometer system

Numerical Modeling of Turbulent Heat Transfer of a Nanofluid at Supercritical Pressure

Effects of Low Temperature on Near-Nozzle Breakup and Droplet Size Distribution in Airblast Kerosene Spray

Experimental study of Cryogenic jet injection using centrifugal nozzles at supercritical pressure

Quantitative Visualization of Injection Jet Flow Behaviors of Transcritical and Supercritical Processes by Pixelated Phase-Shifting Interferometer

Large-eddy simulation of nitrogen injection at trans- and supercritical conditions

Jet penetration and particle dispersion behaviors of supersonic gas–solid oxygen jet under high ambient temperature

Buoyancy Effects on Supercritical-Pressure Conjugate Heat Transfer of Aviation Kerosene in Horizontal Tubes

Effects of the Injector Geometry on a Sonic Jet into a Supersonic Crossflow

Effect of Temperature Conditions on Flame Evolutions of Turbulent Jet Ignition

Microscopic investigation and local standard deviation analysis of liquid propane jets in supercritical environment

Molecular dynamics study on the interfacial characteristics in the process of sub/supercritical evaporation

Modeling and Analysis of Supercritical Flow Instability in Parallel Channels

Experimental Investigation of the Flow and Heat Transfer Instabilities in N-Decane at Supercritical Pressures in a Vertical Tube

Experimental Investigation of Superheated Liquid Injection in Quiescent and Supersonic Crossflow

Flow dynamics of shear-coaxial cryogenic nitrogen jets under supercritical conditions with and without acoustic excitations

Effects of Heat Release on Turbulence Characteristics in a Three-Dimensional Spatially Developing Supersonic Droplet-Laden Mixing Layer