Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Compact microstrip bandpass filter based on hybrid half-and quarter-wavelength resonators

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

A Flat-Passband Microstrip Filter With Nonuniform- $Q$ Dual-Mode Resonators

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

Compact Substrate Integrated Waveguide (SIW) Transversal Filter with Triple-Mode Microstrip Resonator

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

A compact wide stopband microstrip bandpass filter using quarter-wavelength shorted coupled-lines

Design of New Compact Multi-Layer Quint-Band Bandpass Filter

A Compact Quad-Band Bandpass Filter Based on Defected Microstrip Structure

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator