Abstract:As the excavation depth of underground engineering increases, the influence of in situ stress on the blasting effect cannot be ignored. The large number of fractures in the natural rock mass, coupled with the in situ stress, significantly impacts the propagation of stress waves. In this research, a synthetic rock mass approach based on the UDEC grain-based model was employed to investigate crack propagation and coalescence during double-borehole blasting with a variety of fracture networks and in situ stress conditions. The effects of the buried depth, fracture geometric parameters (i.e., the length and intensity), blast parameters (i.e., the explosive charge and borehole spacing), and borehole layouts on blasting-induced rock fracturing were examined. The simulation results showed that for a low-density fracture network dominated by short fractures, the pre-existing fractures have little effect on the propagation of blasting-induced cracks. However, as the length or density of fractures increases, pre-existing fractures could restrain the blasting-induced radial crack propagation and enhance the rock fragmentation between the borehole and the pre-existing fracture. This effect gradually disappeared as the in situ stress increased. In addition, the mismatch between the centreline of double boreholes and the direction of high in situ stress could also affect the coalescence of cracks, especially in high-density fracture networks. Finally, the applicability of empty holes to improve the crack coalescence between boreholes in fractured rock was discussed. This study should be beneficial in understanding the blasting behaviour of deep fractured rocks.Article HighlightsThe synthetic rock mass method was used to examine the crack coalescence process of double-borehole blasting.The effects of the buried depth, fracture geometric parameters, blast parameters, and borehole layouts on blasting-induced rock fractures were investigated.The applicability of empty holes to improve the crack coalescence between boreholes in fractured rock was discussed.

Study on Cumulalive Energy Effect in Directional Fracture Controlled Blasting in Rock

STUDY ON THE DIRECTIONAL FRACTURE CONTROLLED BLASTING WITH SLIT-CHARGE IN ROCK

Application Study on Directional Fracture Controlled Blasting with Shaped Charge in Rock

Application Study on Blasting with Linear Cumulative Cutting Charge in Rock

Study on Orientation Fracture Blasting with Shaped Charge in Rock

Research on Numerical Simulation of Rock Breaking Using Tbm Disc Cutters Based on Udec Method

STUDY ON CUMULATIVE EXPLOSION OF CONTROLLED BLASTING OF ROCK MASS

Directional Fracture Controlled Blasting Technology of Bidirectional Cumulative Energy for Roadway Rock Surrounding

Application Study on Controlled Blasting Technology with Shaped Charge in Rock Mass

Study on crack propagation mechanism and charge structure optimization of tunnel shaped charge hydraulic blasting

Study on the crack propagation behaviour of eccentric uncoupled blasting in a deep-level rock mass

Influence mechanism of the diameter of the energy accumulation hole on the bi-directional cumulative tension blasting

Damage Analysis of Concrete Structure under Multidirectional Shaped Charge Blasting Using Model Experiment and Ultrasonic Testing

An indirect method for calculation of rock dynamic tensile strength and fracture energy using blasting experiments

Effects of the initiation position on the damage and fracture characteristics of linear-charge blasting in rock

Research on the crack formation mechanism of shaped charge blasting and the new dual-shaped charge blasting technology

Research on Precision Controlled Blasting Of Rock Directional Fracture

Numerical study on the dynamic fragmentation of rock under cyclic blasting and different in-situ stresses

Shaping characteristics of excavation contours in sequential controlled fracture blasting of rock-anchored beams in Shuangjiangkou underground powerhouse

NEW TECHNOLOGY OF CUMULATIVE CUTTING BLASTING WITH MULTI-PERFORATING

Application of a synthetic rock mass approach to the simulation of blasting-induced crack propagation and coalescence in deep fractured rock