Abstract:The simply supported slab bridge is a typical perfricated reinforced concrete bridge. Under the influence of increasing vehicle loads and natural environmental erosion, the hinge joints between slabs suffer from damage that cannot be easily evaluated, which brings negative effects on the load carrying capacity of bridges. In the present study, a hybrid method for damage detection and condition assessment of hinge joints in hollow slab bridges using physical models and vision-based measurements was proposed. The stiffness reduction of hinge joints is taken as the damage degree and condition level of the inspected hinge joints. An analytical model of a simplified spring-mass system was firstly built to demonstrate the applicability of using the relative displacement ratio as the damage index of hinge joints. The relationship between the relative displacement ratio and the stiffness reduction of hinge joints was then studied thoroughly through a parametric study on finite element models considering different damage levels of hinge joints. Thresholds of the relative displacement ratio were defined to classify the damage states of hinge joints. The damage index of target hinge joints can be calculated from the actual data provided by using computer vision-based multi-camera and multi-point displacement measurements. Lastly, the application of a real-life bridge under normal traffic was demonstrated to verify the feasibility of the quantitative evaluation of the service status of joints in hinged-slab bridges. It indicated that the proposed method could evaluate the damage degree of joints quantitatively, effectively and economically.

Damage Identification of Hinged Joints of Prefabricated Slab Bridges Based on Transient Dynamics Analysis

Force Transfer Mechanism of the Hinge Joint of Multi-Adjacent Hollow Slab Precast Bridge

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

A hybrid method for damage detection and condition assessment of hinge joints in hollow slab bridges using physical models and vision-based measurements

Hinge Joints Performance Assessment of a PC Hollow Slab Bridge Based on Impact Vibration Testing

Detection and Damage Evaluation of Hinge Joints in Hollow Slab Bridges Based on a Light-Load Field Test

Stiffness-Based Evaluation of Hinge Joints in Prefabricated Assembled Multi-Girder Bridges under Operational Conditions

Damage identification of hinge joint in hollow slab bridge based on model updating and orthogonal matching pursuit algorithm

Reliability Evaluation of Hinged Slab Bridge Considering Hinge Joints Damage and Member Failure Credibility

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Structural damage identification based on dynamic deflection sensitivity of bridge under vehicle loading

Damage Identification Analysis of Bridge Beam with Spaced Supports As Quasi-Periodic Structure

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

A Spectrum Correlation Matrix-Based Rapid Damage Identification Method for Joints in Hinged Slab Bridges by Sparse Measurement

Research on Methods of Damage Diagnosis Based on Bridges with Dynamic Characteristics

Research on assessment of hollow slab bridge hinge joint damage and reinforcement method based on steel strip-tie rod clamping

Damage identification method for tied arch bridge suspender based on quasi-static displacement influence line

Numerical Analysis on Hinge Joints Reinforcement Effect of Prefabricated Plate Girder

Experimental Research on Strengthening Transverse Connections of Prefabricated Concrete Hollow Core Slab Beam Bridges

Experimental and numerical studies on damage severity identification of simply supported beam bridges