Abstract:The stereo-vision methods have been developed and used for measuring the wing deformation while the aircraft is in flight. However, it is difficult to achieve accurate measurement in flight test since inevitable camera movements often occur due to elasticity in the camera support and the surrounding structure, especially during heavy turbulence and large maneuver flight. Any slight camera movements within a stereo-vision system can directly influence the calibrated extrinsic parameters, then decrease 3D reconstruction accuracy, and even cause the measurement to fail. This study proposes a method to correct the effect of the camera movements to enable accurate wing deformation measurement using a stereo-vision system. A reference coordinate system is established based on the control points to unify the changing camera coordinate system. A dynamic extrinsic parameters calibration algorithm is developed to estimate the instantaneous position and orientation of the stereo cameras. To verify the presented method, an experiment in which the stereo cameras occurring relative movement was performed. The results show that the proposed method has effectively corrected the effects of camera movements. Furthermore, the proposed method was applied to the practical wing deformation measurement of a UAV in fieldwork. The maximum error of length and displacement is less than 0.8 mm when the stereo cameras remained unchanged. The actual accuracy of the overall measurement system is about 0.01% of the observed area (e.g. 0.8 mm in 6 m scale) under the conditions of flat viewing angle and outdoor scenes. While camera movements occur during the test, the corrected RMS error of displacement is reduced to about 1.5 mm and has decreased by 50% compared with that before correction. The enhanced precision and robustness of wing deformation measurement are well realized by the proposed method of correcting camera movements.

Large Space Camera Calibration for Three-Dimensional Videogrammetric Vibration Measurement of Large Aeroplane Model in Wind Tunnels

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Camera Calibration Technique Based on Virtual 3D Object

A Novel Method for Angular Vibration Calibration Based on a Retroreflection Film Laser Interferometer and a Rotary Encoder

LiDAR-Camera Calibration under Arbitrary Configurations: Observability and Methods

Camera calibration method for an infrared horizon sensor with a large field of view

Calibration for the Errors Resulted from Aberration in Long Focal Length Measurement

Planar Visual Metrology Using Partition-Based Camera Calibration

A Novel Camera Calibration Method Based on Multiple Calibration Planes

Partition-Based Camera Intrinsic and Extrinsic Parameters Calibration for Planar Visual Metrology

A Combined Measurement Method for Large-Size Aerospace Components

A measurement method of motion parameters in aircraft ground tests using computer vision

Camera Calibration in 3-D Measurement Systems

Freely expandable visual measurement network for large scale space based on auto calibration method

A new precision measurement method used in space lab assembling

Wing deformation measurement using the stereo-vision methods in the presence of camera movements

Calibration method of spatial transformations between the non-orthogonal two-axis turntable and its mounted camera

A new calibration method in 3D ultrasonic imaging system

Enhanced Three-Axis Frame and Wand-Based Multi-Camera Calibration Method Using Adaptive Iteratively Reweighted Least Squares and Comprehensive Error Integration

A Simple Method of Accurate Aberration in a Camera with Large Field Lens

Camera Self-Calibration with GNSS Constrained Bundle Adjustment for Weakly Structured Long Corridor UAV Images