Abstract:Unraveling the microstructural heterogeneity is an important issue to understand the physical and mechanical properties of metallic glasses. Structural relaxation below the glass transition temperature Tg and cold rolling at ambient temperature are effective ways to tune the state within the potential energy landscape of metallic glasses, modifying the microstructural heterogeneity. With the help of nanoindentation technique, by scrutinizing the local reduced modulus and hardness of a typical Zr50Cu40Al10 metallic glasses in different energy states (from structural relaxed state to rejuvenated state), we demonstrate that the enhancement of microstructural heterogeneity plays an important role in tailoring the mechanical behavior. The internal friction coefficient is obtained by fitting the experimental load-displacement curves with finite element simulation. It is found that internal friction coefficient decreases with the increase of concentration of flow defects. The stress exponent obtained from the creep stage shows a strong dependence on the structural state of metallic glasses. Effects of structural relaxation and rejuvenation on the structural state are rationalized in terms of the relative flow defects concentration. Finally, the statistics of discrete displacement bursts during the deformation process were probed. We find that the displacement bursts behavior is sensitive to the structural energy state (microstructural heterogeneity). The displacement bursts phenomenon changes from obvious (relaxed state) to unapparent behaviors (rejuvenated state). By given a physical schematic, the correlation between the displacement bursts size and the shear band size in the local plastic zones is well established, which will lead to a deeper understanding of the rejuvenation-induced plasticity of metallic glasses.

Size dependent plasticity of a Zr-based bulk metallic glass during room temperature compression

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

Influence of Thermal Treatments and Plastic Deformation on the Atomic Mobility in Zr50.7Cu28Ni9Al12.3 Bulk Metallic Glass

Unusual Compressive Plasticity of a Centimeter-Diameter Zr-based Bulk Metallic Glass with High Zr Content

Rate-dependent Plastic Deformation of TiZrHfCuNiBe High Entropy Bulk Metallic Glass

High temperature deformation behaviors of the Zr 63.36 Cu 14.52 Ni 10.12 Al 12 bulk metallic glass

Super-high Compressive Plastic Deformation Behaviors of Zr-based Metallic Glass at Room Temperature

On the Serrated Behavior during Plastic Deformation of a Zr-Based Bulk Metallic Glass

Influence of Size-Dependent Free Volume Variation and Distribution on the Thermoplastic Flow Behavior of Zr-based Bulk Metallic Glass

Influence of Defects to Zr65Cu18Ni7Al10 Bulk Metallic Glass Properties Under Dynamic Compression

Structural Origins for the High Plasticity of a Zr–Cu–Ni–Al Bulk Metallic Glass

FRACTURE BEHAVIOR OF Zr65Al7.5Ni10Cu17.5 BULK METALLIC GLASS UNDER MONAXIAL COMPRESSION AT ROOM TEMPERATURE

Significant Room-Temperature Plasticity in a High Zr-containing Bulk Glassy Alloy

Superplastic deformation behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass in the supercooled liquid region

Enhanced Ductility in a Zr65Cu15Al10Ni10 Bulk Metallic Glass by Nanocrystallization During Compression

Influence of Strain Rate on Compressive Deformation Behavior of a Zr-Cu-Ni-Al Bulk Metallic Glass at Room Temperature

Intrinsic or extrinsic size-dependent deformation behavior of a Zr-based bulk metallic glass in supercooled liquid state?

Hierarchical amorphous structures in a Zr 50 Cu 42 Al 8 bulk metallic glass

Unusual Room Temperature Ductility of A Zr-Based Bulk Metallic Glass Containing Nanoparticles

Shear Bands in A Bulk Metallic Glass after Large Plastic Deformation

Microstructure Evolution of A Ti-Based Bulk Metallic Glass Composite During Deformation