Abstract:Fast-scan cyclic voltammetry (FSCV) is an electrochemical sensing technique that can be used for neurochemical sensing with high spatiotemporal resolution. Carbon fiber microelectrodes (CFMEs) are traditionally used as FSCV sensors. However, CFMEs are prone to electrochemical fouling caused by oxidative byproducts of repeated serotonin (5-HT) exposure, which makes them less suitable as chronic 5-HT sensors. Our team is developing a boron-doped diamond microelectrode (BDDME) that has previously been shown to be relatively resistant to fouling caused by protein adsorption (biofouling). We sought to determine if this BDDME exhibits resistance to electrochemical fouling, which we explored on electrodes fabricated with either femtosecond laser cutting or physical cleaving. We recorded the oxidation current response after 25 repeated injections of 5-HT in a flow-injection cell and compared the current drop from the first with the last injection. The 5-HT responses were compared with dopamine (DA), a neurochemical that is known to produce minimal fouling oxidative byproducts and has a stable repeated response. Physical cleaving of the BDDME yielded a reduction in fouling due to 5-HT compared with the CFME and the femtosecond laser cut BDDME. However, the femtosecond laser cut BDDME exhibited a large increase in sensitivity over the cleaved BDDME. An extended stability analysis was conducted for all device types following 5-HT fouling tests. This analysis demonstrated an improvement in the long-term stability of boron-doped diamond over CFMEs, as well as a diminishing sensitivity of the laser-cut BDDME over time. This work reports the electrochemical fouling performance of the BDDME when it is repeatedly exposed to DA or 5-HT, which informs the development of a chronic, diamond-based electrochemical sensor for long-term neurotransmitter measurements in vivo.

Amperometric Detection of Sulfide at A Boron Doped Diamond Electrode: the Electrocatalytic Reaction of Sulfide with Ferricyanide in Aqueous Solution.

Voltammetric Characterization of a N,N'-diphenyl-p-phenylenediamine-loaded Screen-Printed Electrode: a Disposable Sensor for Hydrogen Sulfide.

Amperometric Determination of Sulfide at a Pre-Oxidised Nickel Electrode in Acidic Media

Advanced electrochemical detection of arsenic using platinum-modified boron-doped diamond by anodic stripping voltammetry

The Electrochemically Initiated Reaction of Sulfide with N,N‐Diethyl‐p‐phenylenediamine in Dimethylformamide. Part II: Implications for Sensing Strategies

Physical Adsorption of N,N'-diphenyl-p-phenylenediamine Onto Carbon Particles: Application to the Detection of Sulfide.

Bismuth sulfide microstructures decorated with functionalized boron nitride composite for electrochemical detection of sulfadiazine

Flow Injection Amperometric Detection of Sulfide Using a Prussian Blue Modified Glassy Carbon Electrode

Amperometric determination of sulfide ion by glassy carbon electrode modified with multiwall carbon nanotubes and copper (II) phenanthroline complex

An in Situ Copper Plated Boron‐Doped Diamond Microelectrode Array for the Sensitive Electrochemical Detection of Nitrate

4-Aminophenylboronic acid dimer sensitized carbon nanotubes for the construction of portable and disposable sulfide electrochemical sensors

Influence of Boron Doped Level on the Electrochemical Behavior of Boron Doped Diamond Electrodes and Uric Acid Detection

Electrochemical Determination of Sulphide at Nickel Electrodes in Alkaline Media: A New Electrochemical Sensor

Development and application of electrochemical sensor of boron-doped diamond (BDD) modified by drop casting with tin hexacyanoferrate

Improving Trace Detection of Methylene Blue by Designing Nanowire Array on Boron-Doped Diamond as Electrochemical Electrode

Development of a Boron-Doped Diamond Electrode for the Simultaneous Detection of Cd2+ and Pb2+ in Water

Evaluation of In Vitro Serotonin-Induced Electrochemical Fouling Performance of Boron Doped Diamond Microelectrode Using Fast-Scan Cyclic Voltammetry

A New Palladium Complex As a Dual Fluorometric and Colorimetric Probe for Rapid Determination of Sulfide Anion

Application of Multiwalled Carbon Nanotubes/Ionic Liquid Modified Electrode for Amperometric Determination of Sulfadiazine

Anodic Stripping Voltammetry of Sulphide at a Nickel Film: Towards the Development of a Reagentless Sensor

Bismuth Film Electrodes for Indirect Determination of Sulfide Ion in Water Samples at Trace Level by Anodic Stripping Voltammetry